SIGforum.com    Main Page  Hop To Forum Categories  Reloading    found a few powders locally wonder if I should grab them
Go
New
Find
Notify
Tools
Reply
  
found a few powders locally wonder if I should grab them Login/Join 
Quit staring at my wife's Butt
Picture of XLT
posted
I have never tried VV 320- , Ramshot silhouette or tight group but my local shop has a few containers of each. I normally use AA5-7-9

I heard tightgroup is dirty but decent reviews on the others. the prices are average.
 
Posts: 5587 | Registered: February 09, 2003Reply With QuoteReport This Post
Member
posted Hide Post
XLT - I, like you, decided to do a little review of my limited powder inventory and a long time local gun store manager says reloading powder could be the next reloading shortage item like primers are currently if the Nov election does not go as we hope it goes. This guy buys about 50-75 lbs. a week for their two stores....He said about two months ago that a lot of the popular powders were showing sold out at all of his distributors and because many powders are imported the lead time on some can be long...

Because of this I reviewed what he had in stock at their two stores and matched up that list to my most popular rounds I load (9mm, 223/5.56, 308, and 300 B/O) and decided to buy up a few extra pounds just in case....This guy knows a lot more about the powder market than I ever will so I took his advice and bought what I could afford...This was about 6-8 weeks ago...Now his shelves are all but empty of all powders....I bought Varget, Titegroup, Reloader 10X, Bullseye, IMR-4320, and CFE-223.....not a lot of each because he had a 2 unit limit per store per day so it took me several trips to get one or two 1 lb. cans of each.....At that time his prices ranged from $22 to $28 per 1 lb. can.

Glad I did now and wished I had bought more - but that hind sight is always 20/20.....Just my personal experience related to this topic.....Mark
 
Posts: 3245 | Location: MS | Registered: December 16, 2004Reply With QuoteReport This Post
Non-Miscreant
posted Hide Post
I'm going to opine that there are times we can't be too selective about the powder we find. If its a powder that seems to be good for the cartridges we load, its maybe a smart thing to purchase if the price isn't too outlandish. Going on 11 years ago now, I had heart surgery. You know the one, where you get a valve job and new feed lines. So I retired and went home to recover. I guess the butcher did an adequate job because I'm still around, and meaner than ever. And true to form, I've lost my inventory sheet of my powder. I never even bothered with powder, being mostly a pistol and revolver shooter my go to powder was Bullseye. My 8#er should have still been full. So my wife wanted a new house and I didn't care, figuring I was a goner for sure. We packed up and moved. I had not just too much reloading stuff, but way too much.

Went looking for my Bullseye and all I could find was the jug that held 1#, no trace of the big, party jug of it. I knew it was around here someplace, but it didn't have a place in this new house. Don't let your wife put stuff you might need "away". So at the next gun show, the powder guy was there and wanted to sell out some old stuff. And he had another 8#er of Bullseye, and even though it was pricey at $110, I ponied up.

True to form I got home and wandered where the hell am I going to store it. So I guessed under one of the reloading tables would be a good place. So I stuck it there, right next to the partially used old one. Go figure. Maybe 12# total, and at 3 grains per cartridge, that'll be mroe than I can ever load or shoot up. Not counting the 8,000-10,000 I've already got stuffed full. Lets do some simple rough math, 12# @ 7000 grains per # = 72,000 rounds, give or take, plus the 1# I'm working out of. roughly 80,000 rounds, give or take. Way more than I have primers to set it off.

So do I trade or just sell the lmr lying around? If anyone were to guess, the above poster should just buy up all the powder he can. Then he can be just like me! Big Grin Too much odd stuff not taking up too much space. The only ammo I've reloaded in the 1ast 10 years has been .32-20, mild loads. I can't even remember if I've still got a .32-20 rifle, but maybe. But they take SR primers. Another thing to take to a gun show. Where maybe I can catch COVID.

So here's the deal. Its time to sell stuff off, the stuff I'll never load or shoot. Pretty sure there's some fool out there that will want my old stuff. If they're dumb enough to pay high prices, I'm dumb enough to sell to them!


Unhappy ammo seeker
 
Posts: 18387 | Location: Kentucky, USA | Registered: February 25, 2001Reply With QuoteReport This Post
Like a party
in your pants
Picture of armored
posted Hide Post
I would buy all he has. All usable powders.
 
Posts: 4622 | Location: Chicago, IL, USA: | Registered: November 17, 2002Reply With QuoteReport This Post
Member
posted Hide Post
I use Silhouette for 9 and 40. It's best loaded in the upper range. When loaded mid level it can leave a residue. That doesn't bother me. I like that it is a very low flash powder and has extremely consistent drops from my Dillon powder measure. Its a fine spherical powder. Think tiny spheres that have been smashed in the middle. Flows very well. I make sure I keep that well stocked. Big Grin

-TVz
 
Posts: 432 | Location: North of DFW | Registered: May 01, 2012Reply With QuoteReport This Post
Member
Picture of BlackTalonJHP
posted Hide Post
Titegroup is cleaner than W231. It's probably my favorite cheap pistol powder.
 
Posts: 1059 | Location: Texas | Registered: September 18, 2019Reply With QuoteReport This Post
Member
Picture of hairy2dawg
posted Hide Post
I found someone locally selling some ETR7 for $17/lb. I've never used it, and don't really have to have it, but looking into it, it uses the same load data as Tightgroup, and is supposedly super clean. I bought 12# because it was a decent price and I can learn to use it if need be.
 
Posts: 1276 | Location: Athens, GA | Registered: February 01, 2005Reply With QuoteReport This Post
teacher of history
Picture of maxwayne
posted Hide Post
About 6 weeks ago, I bought a 4 pound jug of 231. I also have a 4 pounder of Unique and several assorted cans, including one of Herco that someone gave me. I am ok for powder way into the future.
 
Posts: 5616 | Location: Central Illinois | Registered: March 04, 2001Reply With QuoteReport This Post
Plowing straight ahead come what may
Picture of Bisleyblackhawk
posted Hide Post
I would buy what you can...this is a time when reloading supplies are at a premium...just Remember that Titegroup is a low VMD powder that is easy to miss a double charge (much like AA#2 which has pretty much the same VMD)...I keep 4# of Titegroup in reserve in case I run out of Hodgdon Clays or Claydot (l like a “bulkier” powder that fills up a .45 Colt case...but I’ve used Tightgroup for .40 S&W with good success...

https://leeprecision.com/files/instruct/VMD.pdf


********************************************************

"we've gotta roll with the punches, learn to play all of our hunches
Making the best of what ever comes our way
Forget that blind ambition and learn to trust your intuition
Plowing straight ahead come what may
And theres a cowboy in the jungle"
Jimmy Buffet
 
Posts: 10584 | Location: Southeast Tennessee...not far above my homestate Georgia | Registered: March 10, 2010Reply With QuoteReport This Post
Dances With
Tornados
posted Hide Post
If it's anything somewhat popular, I'd buy it for trading. I'd do my best to trade it soon to get what I want.
 
Posts: 11837 | Registered: October 26, 2009Reply With QuoteReport This Post
Member
Picture of cxm
posted Hide Post
Just a side bar... Silhouette is the same as the discontinued Winchester WAP powder... great stuff...

Chuck


quote:
Originally posted by TVzombie:
I use Silhouette for 9 and 40. It's best loaded in the upper range. When loaded mid level it can leave a residue. That doesn't bother me. I like that it is a very low flash powder and has extremely consistent drops from my Dillon powder measure. Its a fine spherical powder. Think tiny spheres that have been smashed in the middle. Flows very well. I make sure I keep that well stocked. Big Grin

-TVz


Hoist on High the Bonny Blue Flag that Bears the Single Star!!!

Certified SIG Armorer
Certified Glock Armorer
 
Posts: 1348 | Location: Florida, CSA | Registered: September 02, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Reloading    found a few powders locally wonder if I should grab them

© SIGforum 2024