This is when I press check.
|The Quiet Man|
Every qualification string I’ve been part of for 22 years: “Shooters, take that (whatever is required for the string) round magazine. LOAD, PRESS CHECK and HOLSTER. On the command of FIGHT...”
I press check every time I pick up a weapon that has been out of my immediate control. I’m human. I make mistakes. I’ve seen plenty of clicks instead of bangs happen to people on the range because they assumed a round was chambered. I’ve seen more than one officer go to download a weapon that likely hasn’t been shot since last years quals only to find an empty chamber. Hell. Even if the weapon HAS been in my immediate control and I know it’s loaded I’d STILL press check before walking into a situation where I thought I’d need it. Takes a second and costs nothing. Humans make mistakes.
But I’m just an old broken down cop, not a high speed tactical trainer. I’ll be more than happy to never find myself where rounds are traveling in two directions ever again.
Safety Rule #1: The gun is always loaded.
Safety Rule #1a: Trust, but verify.
If it needs to be unloaded, check the chamber.
If it needs to be loaded, check the chamber.This message has been edited. Last edited by: RichardC,
|Be Like Mike|
I check the chamber any time I pick up a gun that I’m not actively shooting. The reason being is that I’ve burned up a coffee maker that I “knew” that I turned off, forgot keys that I “knew” that I put in my pocket, and so on.
I also check for my wallet if I can’t specifically remember putting it in my pocket, check to make sure my pocket knife is where it should be during the day, etc, etc, so it may just be me also.
"Structural engineering is the art of moulding materials we don't understand into shapes we cannot precisely analyze, so as to withstand forces we cannot really access, in such a way that the community at large has no reason to suspect the extent of our ignorance." Dr. A. R. Dykes
This is and always has been my thinking. I count the rounds as I load the mag and always try to get one more in, just in case I miscounted.
If I do that and, after racking/dropping the slide, can get another into the mag, then there must be one in the chamber. Once it's loaded it either goes into a rack in the safe or into a holster, and there it stays.
I know if it's out of the safe in either a holster or the nightstand, it's loaded. Period.
The "non-combat" firearms in my safe are always unloaded. The combat firearms are always loaded. Nonetheless: Any firearm I pick up out of the safe that's neither my nightstand pistol nor the one I've been carrying I assume to be loaded (Rule 1)--but always double-check immediately upon picking it up. I double-check by dropping the mag. If there are rounds in it: It's loaded. If there are not: I pull the slide to make certain it's not.
To each their own, but press-checking, to me, seems like unnecessary manipulation of a loaded firearm.
"America is at that awkward stage. It's too late to work within the system,,,, but too early to shoot the bastards." -- Claire Wolfe
The dominant media is no more "mainstream" than leftists are liberals.
|fugitive from reality|
If that's what you believe then you may be too stupid to understand the answer.
'I'm pretty fly for a white guy'.
I do laugh a bit at the guys on the range in bright daylight at the start of a stage that aggressively rack the gun to load then draw back the slide to check for a loaded round. For me the sensible thing is to slowly load and simply watch the round enter the chamber.
While there are techniques for doing no or low light press checks and they certainly have merit but why make things more complicated on the range where simply watching what you are doing will suffice?
There have been times, especially with smaller guns like my G43 where I didn’t quite seat the mag all of the way and it didn’t grab the 1st round. This is always when I’m shooting and practicing speed reloads but it still happens so I always check whenever I reload after shooting/cleaning but I’m one and done.
|Powered by Social Strata||Page 1 2|