NullThis message has been edited. Last edited by: dwd1985,
October 11, 2018, 05:26 PM
PGT
KH9 is a limited release model...basically a modern update of the SITES Spectre and is a blow-back design and top-charging. The GHM9 is a more budget-minded derivation of that the KH9 that is a more traditional layout.
The APC9 is blow-back as well but has a hydraulic damper system at the rear and is the smoothest firing of the three.
There's also the P26 which is a modern Tec-9 and the TP9 which is a blow-back semi version of teh MP9 which was originally a Steyr design.
Lastly, there's the weird pistol form factor USW which you can add a stock to. Think of it as a Sphinx SDP with Aimpoint micro optic and stock. Carry on the hip, fire from the shoulder.
October 11, 2018, 05:49 PM
DaBigBR
Same mag on all of the 9mm, by the way, except the USW.
GHM9 2.0 is shipping now as well. Rumors of a Glock mag version, too.
October 11, 2018, 06:17 PM
Andyb
quote:
Originally posted by DaBigBR: Rumors of a Glock mag version, too.
No rumor there They exist and are coming. I half way think B&T is trolling all the "DoEs iT taKe gLOcK MagS" folks
"Pickin' stones and pullin' teats is a hard way to make a living. But, sure as God's got sandals, it beats fightin' dudes with treasure trails."
"We've been tricked, we've been backstabbed, and we've been quite possibly, bamboozled."
October 11, 2018, 10:10 PM
Shackelford
In addition to what PGT covered, there are a few more differences. The GHM series also has the hydrolic buffer, like the APC. Both are also available in 45. If you are SBRing, the APC has the most solid stock. The TP9, P26 & GHM use the same thin wire stock, but the GHM and APC can also take a collapsing stock as well, but costs a cool $500, so adding that stock to the GHM puts it close to the price point of the APC9. The thin wire stock on the GHM9 also winds up with a very long LOP, so you don't see many versions of that. The APC is also available in an SD version, that is compatible with the MP5-SD suppressor mounts. The GHM-9 can also be had in a compact version, with a stubby barrel.
The most popular config right now seems to be the GHM with the collapsing stock and the tail hook pistol "brace", which folks seem to like as good as a proper stock, isn't as hinkey as most other braces & avoids the tax stamp.
October 11, 2018, 10:19 PM
Shackelford
quote:
Originally posted by dwd1985:
In your opinion, is waiting for version two worth it?
Mostly, it depends on how valuable you think glock compatibility is. The Gen2 has an upper and bolt that will let you buy a glock mag lower. There's apparently some other changes to allow you to swap barrel/frontend, too.
Yes...not cheap. But, at about $1850-1900, the entire thing is cheaper than an APC9 pistol alone
October 14, 2018, 04:52 PM
David W
quote:
Originally posted by RHINOWSO:
quote:
Originally posted by David W: The Scorpion Killer?
At twice the price, I think not.
Its like comparing a SIG Legion to a Glock, IMO.
The little mouse is eating a scorpion
David W. Rather fail with honor than succeed by fraud. -Sophocles
October 14, 2018, 08:21 PM
PGT
I've shot a Scorpion extensively and while I'd want an SBR'ed version with tucked can, this B&T is a different class of gun. Feels much better in hand.
October 15, 2018, 12:03 PM
Amurr
Which one should I get main purpose as HD weapon and will support a can. 1) APC 2) GHM 3) GHM compact 4) wait for APC pro with non reciprocating charging handle