SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    Vortex Viper PST 6x24x50 going back again....Issue resolved.
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Vortex Viper PST 6x24x50 going back again....Issue resolved. Login/Join 
Member
posted Hide Post
quote:
Originally posted by apf383:
This model here:
http://www.homedepot.com/p/Hus...nch-H4DTWA/206743985

I set it for about 13, scope is mounted, leveled, and appears good. I have not made it to the range yet though. Thanks all.


when I click on that link it brings up a torque wrench with a Torque range: 40-200 in. Lbs. It also lists in the description 3.3-16.7in-lbs, but in the specs it lists 3.3-16.7ft-lbs which corresponds to 40-200in-lbs. The description has incorrectly labeled units. That makes sense that the tube was damaged due to over tightening. And just a guess but if you originally set it to 15 I am guessing that was the ft-lb setting(my in-lb torque wrench has in-lbs on one side and ft-lbs on the other side.) which is equivalent to 180in-lbs. And 13ft-lbs is equivalent to 156in-lbs 12 times more than needed. Bottom line if this is the torque wrench you have it doesn't go light enough to do what you need.
 
Posts: 875 | Location: South Dakota | Registered: May 21, 2013Reply With QuoteReport This Post
Master-at-Arms
Picture of apf383
posted Hide Post
I get what youre saying however mine has in.lbs on one side and Newton meters on the other, so there was no way i went 15ft.lbs. besides Id know one from the other by feel. I just backed it way down the scale, and gave it a go, still realizing there is room for more room for error that low. The reticle is nice and square now, so i hope im ok. I hung a plumb line about 30 yds away and leveled the crosshairs off of that. I havent made it to the range yet, but hopefully soon. Its perfect now, so I feel ok about it. Thanks.



Foster's, Australian for Bud

 
Posts: 7489 | Location: Stuck in NY, FUAC  | Registered: November 22, 2005Reply With QuoteReport This Post
When the will is strong, everything is easy
Picture of celticwolf
posted Hide Post
My AMG had to go back. Haven't had a chance to mount and take it back to the range yet. I don't have the same confidence level now. I may pick up a Mk 8 with h59, or a Sig Tango 6 optic with the dev-l, to replace it. Undecided.


"You can avoid reality, but you cannot avoid the consequences of
avoiding reality." Ayn Rand
 
Posts: 2125 | Location: AZ | Registered: April 10, 2004Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    Vortex Viper PST 6x24x50 going back again....Issue resolved.

© SIGforum 2024