SIGforum
What's the point of the 1.5x power in the variable scopes?

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/630601935/m/9030087524

June 15, 2017, 03:57 PM
12131
What's the point of the 1.5x power in the variable scopes?
Can the experts explain to me? I see no point in it. How much more of a magnification can it be over the 1x?


Q






June 15, 2017, 04:10 PM
Il Cattivo
It's more a matter of it being difficult to get down to a true 1X on variable scopes. Why, I don't know.
June 15, 2017, 04:14 PM
YellowJacket
A lens has to be ground to a curve in order to get magnification. So once it is curved, the magnification power is determined by the distance away from the ocular lens (the one near the eye.)

But once you grind a lens to a convex curve, it is impossible for it to ever render a true 1X again, as it will always be magnifying slightly. And it would have to get very close to the ocular lens to get close to 1x.



I'm gonna vote for the funniest frog with the loudest croak on the highest log.
June 15, 2017, 04:15 PM
NikonUser
I'm not an expert, but I have a theory.

It all has to do with magnification range and marketing. People who buy low power scopes have their reasons for wanting a 1X or close to bottom magnification. Manufacturers try to show a great range in these scopes to make them more desirable.

If you start with a 1X scope and you have a 3X zoom, the standard range, your scope will be a 1-3X32, let's say. On the other hand, if you start with a 1.5X base, your scope can then be marketed as a 1.5-5X32. It's still a 3X zoom, and the top end is really not 5X, it's 4.5X but nobody will argue with you as it's really difficult to see the difference between 4.5X and 5X.

Now if your zoom ratio is 4X, you have a 1.5-6X32 and people think it's a 6X zoom, because no one cares about the difference between 1X and 1.5X.

If your zoom ratio is 5X, your 1.5X now becomes a 1.5-8X32. Wow, that's like an 8X zoom ratio.

See how that works?

This message has been edited. Last edited by: NikonUser,
June 15, 2017, 04:20 PM
12131
Thanks, guys! So obvious, but this caveman never got it, until now. Cool


Q






June 15, 2017, 10:21 PM
kaschi
Man, I still don't get it. They could have said "1-5 Power" and it would have at least made sense. Seems like an idea somebody came up with to make it sound more precise. Seriously, it's like my eye doctor appt last week when the doctor said "what's clearer, number 1 or number 2?" and you don't really see a difference or cannot decide…
June 16, 2017, 09:17 AM
sigfreund
Like so many things, the devil is in the details. For the hunter shooting large game, there may be no apparent difference between 1× (really, truly no magnification of the sight image) and 1.5×. But if, for example, a sight is being used for something like clearing a building or other close distances with scanning, it matters a lot. Or at least it does to some of us. Other people claim that they can use 3 or even 4-power sights for such purposes without any distraction or handicap, but it took only a couple of experiences with a nominal 1.5-5× scope for me to ditch it in favor of one with no magnification.

As already mentioned, getting a true zero magnification setting in a variable magnification optical sight is/was evidently difficult because it took a long time for it to show up at all, and as far as I know, they’re still fairly expensive.

I have a Leupold Mark 6 1-6×20mm sight that has as close to zero magnification at the 1× setting as I can detect, and it cost far more than the rifle it’s mounted on. Plus it’s still an optical device with lenses to look through. That introduces a small amount of image distortion at the edges when scanning, but as I say, I can’t detect any magnification at the lowest setting.




6.4/93.6

“Wise men talk because they have something to say; fools, because they have to say something.”
— Plato
June 16, 2017, 09:21 AM
bendable
at the other end,
I am not walking the distance it takes to get a dead animal with a 20 power scope





Safety, Situational Awareness and proficiency.



Neck Ties, Hats and ammo brass, Never ,ever touch'em w/o asking first
June 16, 2017, 09:30 AM
sigcrazy7
A true 1x power variable will have distortion, while the distortion is not present in 1.5x scopes. Physics I don't understand.



Demand not that events should happen as you wish; but wish them to happen as they do happen, and you will go on well. -Epictetus
June 16, 2017, 06:38 PM
chansen92
I have read many hunting stories by professional hunters that used scopes preferred 1.5 power because it offered the widest field of vision with some clarity for dangerous game that was in very close. In my world I often hunt in thick cover and like 1.5x because I can get on target quicker. With any thing higher power it can be impossible to find your target.
June 17, 2017, 10:42 AM
IndianaBoy
quote:
Originally posted by sigcrazy7:
A true 1x power variable will have distortion, while the distortion is not present in 1.5x scopes. Physics I don't understand.




June 18, 2017, 10:54 AM
apprentice
What scope is that IndianaBoy?
June 19, 2017, 07:54 AM
IndianaBoy
quote:
Originally posted by apprentice:
What scope is that IndianaBoy?



Steiner T5Xi.