SIGforum
I went and ordered a CMP Special M1 Garand... what do I need to know?
February 02, 2019, 10:03 AM
ShneaSIGI went and ordered a CMP Special M1 Garand... what do I need to know?
The title rather says it all. I've ordered one of the CMP Special rebuilt m1 Garands. I've got a couple cases of PPU "Garand Safe" ball ammo, and some en bloc clips. I've also got an adjustable gas plug on hand.
I've been watching and reading up on the proper assembly/disassembly, and cleaning and lubing for the weapon. And I'm aware of the methods to avoid giving myself "Garand thumb."
So, SigForum, what else do I need to know, if you please?
-ShneaSIG
Oh, by the way, which one's "Pink?" February 02, 2019, 10:14 AM
sw4566Don’t forget a good quality leather sling. I prefer the ones that are made by Turners. Also, all of Garand collector/shooter friends swear by Lubriplate grease for the action.
February 02, 2019, 10:21 AM
ShneaSIGquote:
Originally posted by sw4566:
Don’t forget a good quality leather sling. I prefer the ones that are made by Turners. Also, all of Garand collector/shooter friends swear by Lubriplate grease for the action.
And "sling" goes on the shopping list!
How does Lubriplate compate to Lucas gun grease?
-ShneaSIG
Oh, by the way, which one's "Pink?" February 02, 2019, 10:40 AM
WatergoatLubriplate was state of the art in the 1930s, and is the white grease in the little yellow containers issued to GIs. Works as well then as now. Modern lubes with moly, and/or PTFE, are probably slightly better from a long term perspective. You will clean yours after every range session, and can re-grease as needed. So, it shouldn't matter.
February 02, 2019, 10:46 AM
arcwelderJust use a grease.
Lubriplate is great. I use White Lithium brand X from the auto parts store. Lucas Oils grease will also do the job.
Off the bat I'd say just put new springs in it. Then you know it's gtg.
Arc.
______________________________
"Like a bitter weed, I'm a bad seed"- Johnny Cash
"I'm a loner, Dottie. A rebel." - Pee Wee Herman
Rode hard, put away wet. RIP JHM
"You're a junkyard dog." - Lupe Flores. RIP
February 02, 2019, 10:50 AM
pillboxesghostquote:
Originally posted by ShneaSIG:
quote:
Originally posted by sw4566:
Don’t forget a good quality leather sling. I prefer the ones that are made by Turners. Also, all of Garand collector/shooter friends swear by Lubriplate grease for the action.
And "sling" goes on the shopping list!
How does Lubriplate compate to Lucas gun grease?
Lubriplate 130-A Mil-Spec grease was selected by the US Army as the choice lubricant for maintaining the M1 (and M14) rifle. Don't know if the Armed Forces ever tried any Lucas products on any thing.
However any good quality grease ought to work fine.
------------------------------------------------------------
"I have resolved to fight as long as Marse Robert has a corporal's guard, or until he says give up. He is the man I shall follow or die in the attempt."
Feb. 27, 1865 Letter by Sgt. Henry P. Fortson 'B' Co. 31st GA Vol. Inf.
February 02, 2019, 10:53 AM
nhracecraftLubriplate made the original mil-spec grease for the M1 Garland (and the M1 Carbine?)....The stuff just works! Per CMP, "It is the correct lubrication for the M1 Garand and absolutely critical for its proper operation."
The mil-spec designation is MIL-g-46003, but the actual product is Lubriplate 130-A. Obviously there have been numerous advancements in firearm lubrication since WW II, but many 'purists' swear it! YMMV
____________________________________________________________
If Some is Good, and More is Better.....then Too Much, is Just Enough !!
Trump 2024....Save America!
"May Almighty God bless the United States of America" - parabellum 7/26/20
Live Free or Die!
February 02, 2019, 11:02 AM
ShneaSIGGood gun grease - check.
-ShneaSIG
Oh, by the way, which one's "Pink?" February 02, 2019, 11:09 AM
rscalzoLubraplate is available from Brownells. A pint will last you several lifetimes.
February 02, 2019, 02:46 PM
jaybirdaccountantAny grease will work but you can find Lubriplate or other white lithium grease at just about any auto parts store.
February 02, 2019, 05:40 PM
357fuzzRemember, the original white Lubriplate was WWII issue and the collectors will pay good money for it. After a while it separated and needed to be stirred. Post war stuff is brown and I think it works better. Remember to grab a bunch of En-Blocs too. You will not need to use the adjustable gas plug with the PPU Garand stuff. Modern hunting ammo you will thought I be on the safe side.
I have a case (lasts forever)of the little jars of Lubriplate that fit in your trap door. Email your address and I will mail you some. I use it in my AR’s and it works great.
February 02, 2019, 09:04 PM
ShneaSIGquote:
Originally posted by 357fuzz:
Remember, the original white Lubriplate was WWII issue and the collectors will pay good money for it. After a while it separated and needed to be stirred. Post war stuff is brown and I think it works better. Remember to grab a bunch of En-Blocs too. You will not need to use the adjustable gas plug with the PPU Garand stuff. Modern hunting ammo you will thought I be on the safe side.
I have a case (lasts forever)of the little jars of Lubriplate that fit in your trap door. Email your address and I will mail you some. I use it in my AR’s and it works great.
You're too kind! Email inbound! Thank you!
-ShneaSIG
Oh, by the way, which one's "Pink?" February 02, 2019, 11:22 PM
captain127With m2 ball or equivalent reloads you won’t need the gas plug. You need a set of 30/06 reloading dies ( I like small base dies) and appropriate powder and bullets. Most reloading manuals have garand specific load data
February 03, 2019, 12:15 AM
PorterNI just received my CMP order - I didn't know what I wanted, but I got two great shooters, for sure. You've got great advice here, so I've got nothing to add other than have fun!!
____________________________
While you may be able to get away with bottom shelf whiskey, stay the hell away from bottom shelf tequila. - FishOn
February 03, 2019, 09:40 AM
ShneaSIGquote:
Originally posted by captain127:
With m2 ball or equivalent reloads you won’t need the gas plug. You need a set of 30/06 reloading dies ( I like small base dies) and appropriate powder and bullets. Most reloading manuals have garand specific load data
Sounds like I need a reloading press, first.
quote:
Originally posted by PorterN:
I just received my CMP order - I didn't know what I wanted, but I got two great shooters, for sure. You've got great advice here, so I've got nothing to add other than have fun!!
2? That's awesome! Thanks and glad you're enjoying!
-ShneaSIG
Oh, by the way, which one's "Pink?" February 03, 2019, 10:44 AM
chansen92quote:
Originally posted by sw4566:
Don’t forget a good quality leather sling. I prefer the ones that are made by Turners. Also, all of Garand collector/shooter friends swear by Lubriplate grease for the action.
In warm climates I will only use Lubriplate white gear grease ( Marine Grade ). My brother was in the Marine Corp in 1957 and that was what they used at that time because of the salt. Iv'e used since 1972 and never have a problem with rust.
February 03, 2019, 03:09 PM
Sagamore-OneBuy more clips !
February 04, 2019, 12:09 AM
ShneaSIGquote:
Originally posted by Sagamore-One:
Buy more clips !
Do the en bloc clips wear out?
-ShneaSIG
Oh, by the way, which one's "Pink?" February 04, 2019, 07:07 AM
RogueJSKThey can, with enough use. They can also get bent if they get dropped and stepped on, or rust if exposed to the elements.
But I wouldn't worry too much about wearing them out. As long as you have a small pile, you'll be fine, and you're unlikely to wear them out. You don't need to hoard hundreds/thousands of them.
The main benefit of having plenty of clips is that you can have all your ammo preloaded on clips before heading to the range.
February 04, 2019, 07:23 AM
ShneaSIGRogue said:
quote:
Originally posted by RogueJSK:
They can, with enough use. They can also get bent if they get dropped and stepped on, or rust if exposed to the elements.
But I wouldn't worry too much about wearing them out. As long as you have a small pile, you'll be fine, and you're unlikely to wear them out. You don't need to hoard hundreds/thousands of them.
The main benefit of having plenty of clips is that you can have all your ammo preloaded on clips before heading to the range.
I heard:
quote:
Originally posted by RogueJSK:
You need to hoard hundreds/thousands of them.
Gotcha, Rogue! Thanks! Gonna order a whole bunch more today.
-ShneaSIG
Oh, by the way, which one's "Pink?"