SIGforum
Preferred lower 1/3 mount for Aimpoint Micro?
February 11, 2020, 01:17 PM
Chris17404Preferred lower 1/3 mount for Aimpoint Micro?
Hi all,
Just purchased an Aimpoint T-2 for my AR, and I'm looking for a lower 1/3 mount. I've done a lot of investigation so far of all the major options. I just want something sturdy and minimal, no real need for QD but if it is then great. I've narrowed it down to these 4: Geissele, Daniel Defense, Scalarworks, and Bobro. They each have their pros and cons.
Geiselle - Perhaps slightly below what many consider true "lower 1/3", rock solid stability and RTZ, slight bolt knob protuberance.
Daniel Defense - Solid stability, lightweight, traditional aesthetics, the spacer could be a worry?
Scalarworks - Solid and lightweight, semi-QD, solid RTZ, the slight cantilever design hinders rear lens cover from sitting fully down.
Bobro - Solid stability, QD, traditional looks, QD release lever sticks rather far out, could gear catch issue?
For those of you with experience using these, what are your thoughts? Note that I have specifically eliminated Larue and ADM from consideration for various reasons.
Thanks for your time.
Chris
February 11, 2020, 01:32 PM
David WI have La Rue and ADM mounts atm, my next mount will be a Scalar for sure.
David W.
Rather fail with honor than succeed by fraud. -Sophocles February 11, 2020, 01:33 PM
bubbatimeDaniel Defense reminds me of cheap Chinese garbage. Not a fan of their mounts.
I like Geiselle and Midwest Industries personally.
Bobro, fat and HEAVY!!
______________________________________________________
Often times a very small man can cast a very large shadow
February 11, 2020, 06:43 PM
lkdr1989I have one of these for my MRO:
KDG SIDELOK
https://kineticdg.com/product/...impoint-t1-t2-h1-h2/
...let him who has no sword sell his robe and buy one. Luke 22:35-36 NAV
"Behold, I send you out as sheep in the midst of wolves; so be shrewd as serpents and innocent as doves." Matthew 10:16 NASV February 11, 2020, 07:18 PM
hrcjonI have used a bunch of different ones.
No to DD for sure not in the same league as others.
I really like the Geissle mount if you don't want a QD. solid and rugged.
I happen to like the Bobro, and especially like you can get it with right side lever which matters on lots of guns like SCAR, side charging AR, etc. I would not consider it "heavy". The QD is way better than most.
I don't have the scalarworks but I would never want a bunch of holes in the mount to catch on all sorts of things even if it saved weight.
“So in war, the way is to avoid what is strong, and strike at what is weak.”
February 11, 2020, 08:44 PM
Lefty SigScalarworks - light, slim, very high quality, QD with no protruding knobs or levers (important for me since I shoot wrong handed).
And they make outstanding fixed iron sights as well.
February 12, 2020, 04:44 PM
curnarskiYou may wish to consider the LaRue LT660. I've run that on my work carbine with my Aimpoint T-1. Never any problems. Superlative QA/QC by LaRue. I ran the quick-detach model. It always returned to zero.
Sorry, I have no experience with the others that you mention and so won't comment.
Good luck!
February 12, 2020, 08:45 PM
RustpotReptilia. Slim and streamlined, absolutely beautifully blends into the upper. Not QD, but very solid. Not super expensive. Basically a better Geissele.
February 13, 2020, 12:25 AM
matthew03Scalarworks is so fine.
February 13, 2020, 09:48 AM
JoshNCGeissele.
---------------------------------------------
"AND YEA THOUGH THE HINDUS SPEAK OF KARMA, I IMPLORE YOU...GIVE HER A BREAK, LORD". - Clark W. Griswald
February 13, 2020, 10:05 AM
smschulzquote:
Originally posted by matthew03:
Scalarworks is so fine.
I never have seen the Scalarworks before but that looks pretty dang nice.
I have mostly used ADM because of price and versatility but also have some Bobro (best quality) and even Larue (least favorite) but the Scalarworks is impressive.
February 13, 2020, 10:41 AM
RHINOWSOI have a couple of ADM mounts for 2 Micros and a Romeo 5. They aren't as new and cool as some mounts, but they still work great for me.
If I was buying new, I'd likely get Reptilia as I have some of their RMR mounts and they are great. But not enough to replace known good / zeroed rifles with ADM Mounts. Geissele looks good as well.
Then again I look at the time / effort to purchase, install, and zero (ammo too) to ensure the sight is 100% zeroed at range as "costs", so I make moves only when they make complete sense.
February 14, 2020, 09:38 PM
Expatquote:
Originally posted by Lefty Sig:
Scalarworks - light, slim, very high quality, QD with no protruding knobs or levers (important for me since I shoot wrong handed).
And they make outstanding fixed iron sights as well.
Late party bump for Scalarworks. Love the mount.
February 14, 2020, 11:05 PM
WARPIG602quote:
Originally posted by Expat:
quote:
Originally posted by Lefty Sig:
Scalarworks - light, slim, very high quality, QD with no protruding knobs or levers (important for me since I shoot wrong handed).
And they make outstanding fixed iron sights as well.
Late party bump for Scalarworks. Love the mount.
This is the way.
________________________________
February 15, 2020, 02:06 AM
ARMT Guyquote:
Originally posted by curnarski:
You may wish to consider the LaRue LT660. I've run that on my work carbine with my Aimpoint T-1. Never any problems. Superlative QA/QC by LaRue. I ran the quick-detach model. It always returned to zero.
Sorry, I have no experience with the others that you mention and so won't comment.
Good luck!
LaRue gets my vote, too.
Been using several of their mounts with T1s for a good number of years and I love 'em.
"Also I heard the voice of the Lord saying who shall I send, and who will go for us? Then said I, here am I, send me."
February 15, 2020, 02:56 PM
Chris17404Thank you for all the recommendations! Scalarworks it is. After examining the pros and cons of each, I decided I'd give Scalarworks a try. After all, "This is the way". Used a coupon at Brownell's too.