January 14, 2020, 02:20 PM
Smokey99MPX Broken Piston (Tappet) and Stuck Gas Ring
After about 6,000 rounds my Piston (Tappet) broke. The Gas Plug came out without a problem. Removed broken piston without problem. The PROBLEM is trying to get the Gas Ring (spiral McFarland?) off the Plug - it is carbon caked in place. Could not get the dental pick to grab the end. Started soaking it in Stihl Carbon Remover. Any of you have experience with the removal that could help? Thanks!
January 14, 2020, 02:31 PM
DSgrousequote:
on (Tappet) broke. The Gas Plug came out without a problem. Removed broken piston without problem. The PROBLEM is trying to get the Gas Ring (spiral McFarland?) off the Plug - it is carbon caked in place. Could not get the dental pick to grab the end. Started soaking it in Stihl Carbon Remover. Any of you have experience with the removal that could help? Thanks!
Try here.
https://inleadwetrust.com/prod...egory/parts-for-mpx/January 14, 2020, 04:17 PM
Smokey99I have already bought replacement Tappet and Gas Rings from them - need to get old rings off plug.
January 14, 2020, 05:42 PM
chaosrobcarefully use the cutoff wheel on your dremel to cut through the wheel if all else fails. I have had to do it many times
January 15, 2020, 03:14 PM
Smokey99Great news! The Stihl Carbon Remover worked! Was able to lift out the end of the gas ring easily with a dental pick!!
January 16, 2020, 06:49 PM
walker77How many rounds do you have through it?
January 17, 2020, 06:06 AM
Smokey999,500 plus or minus 100. I originally said 6,000 but that was just for a different part.