SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    What distance to zero a supressed .17HMR?
Go
New
Find
Notify
Tools
Reply
  
What distance to zero a supressed .17HMR? Login/Join 
Recondite Raider
Picture of lizardman_u
posted
What distance would you zero a Savage Heavy barreled .17HMR bolt action with a 5.56 can attached?

I had the barrel threaded (cut off an inch of barrel, threaded that for a thread protector; re-crowned and threaded the barrel to add a quick disconnect). I put my YHM 5.56 can on and it is super quiet.

My question is at what distance would you zero? I am thinking a zero at 100 yards, but am thinking that might be too far.

I would like to at least set my zero at 50 yards, but prefer a zero at 100 yards like I have my deer rifle.

Thank you,
Dave


__________________________
More blessed than I deserve.
http://davesphotography7055.zenfolio.com/f238091154
 
Posts: 3564 | Location: Boardman, Oregon | Registered: September 19, 2007Reply With QuoteReport This Post
Member
Picture of PGT
posted Hide Post
Zero it at the distance you intend to use it most with.
 
Posts: 3079 | Registered: December 21, 2014Reply With QuoteReport This Post
Member
Picture of wingspar
posted Hide Post
I would start at 25 yards. When happy, move to 50 yards. Then if you want/need to move to 100 yards. I think you will find that the 50 yard zero will almost put you on the money at 100 yards.


---------------
Gary
Will Fly for Food... and more Ammo
Mosquito Lubrication Video

If Guns Cause Crime, Mine Are Defective.... Ted Nugent
 
Posts: 2505 | Location: Oregon | Registered: January 15, 2010Reply With QuoteReport This Post
Go ahead punk, make my day
posted Hide Post
I have mine zeroed mine at 50 yards, which is essentially a 100 yard zero +/-0.5 inches.

It is very flat shooting with that zero.

Like others, I'll start at 25 and put it where I expect it to be (usually a tad low for most calibers), then kick it out to 50 and beyond to tighten up at the desired range.

 
Posts: 45798 | Registered: July 12, 2008Reply With QuoteReport This Post
Sigless in
Indiana
Picture of IndianaBoy
posted Hide Post
quote:
Originally posted by RHINOWSO:
I have mine zeroed mine at 50 yards, which is essentially a 100 yard zero +/-0.5 inches.

It is very flat shooting with that zero.

Like others, I'll start at 25 and put it where I expect it to be (usually a tad low for most calibers), then kick it out to 50 and beyond to tighten up at the desired range.




That chart is very helpful.

OP I would pick the trajectory from that chart that will give you the best results based on expected distances you will be shooting and target size.
 
Posts: 14122 | Location: Indiana | Registered: December 04, 2003Reply With QuoteReport This Post
Recondite Raider
Picture of lizardman_u
posted Hide Post
Thank you all very much.


__________________________
More blessed than I deserve.
http://davesphotography7055.zenfolio.com/f238091154
 
Posts: 3564 | Location: Boardman, Oregon | Registered: September 19, 2007Reply With QuoteReport This Post
Go ahead punk, make my day
posted Hide Post
Glad we could help.

17HMR is a great round - all the best of rimfire (no recoil, relatively quiet suppressed - you'll still get the 'crack' of it going supersonic, but that's it) but you get the nice flat trajectory of a centerfire round. Wind will buck it around a bit if it's blowing, but you also get a lot less of a chance of a ricochet if you miss since the light round pretty much comes apart when it hits something hard, unlike a solid, heavier 22LR or 22MAG.

My kids like seeing the subsonic 22LR make holes in clay pidgins on the berms, hitting them multiple times - then seeing 17HMR just shatter them with a single shot.
 
Posts: 45798 | Registered: July 12, 2008Reply With QuoteReport This Post
quarter MOA visionary
Picture of smschulz
posted Hide Post
quote:
Originally posted by PGT:
Zero it at the distance you intend to use it most with.


Ultimately yes but START where you can get it on paper.
 
Posts: 22898 | Location: Houston, TX | Registered: June 11, 2006Reply With QuoteReport This Post
Crusty old
curmudgeon
Picture of Jimbo54
posted Hide Post
quote:
Originally posted by smschulz:
quote:
Originally posted by PGT:
Zero it at the distance you intend to use it most with.


Ultimately yes but START where you can get it on paper.


This is true for most rifle/caliber combinations in my opinion unless you have a bore sight of some kind which will put you on paper a lot further out.

Jim


________________________

"If you can't be a good example, then you'll have to be a horrible warning" -Catherine Aird
 
Posts: 9791 | Location: The right side of Washington State | Registered: September 14, 2008Reply With QuoteReport This Post
Member
Picture of Sourkraut
posted Hide Post
I have my suppressed Savage 17 HMR sighted in at 100 yards.


"Everybody wants to go to heaven, but nobody wants to die." Joe Louis
 
Posts: 591 | Location: Idaho | Registered: January 17, 2012Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    What distance to zero a supressed .17HMR?

© SIGforum 2024