SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    The start of an early M16 clone
Go
New
Find
Notify
Tools
Reply
  
The start of an early M16 clone Login/Join 
Member
posted
Picked this up today, and while “as is” it’s just a start, needing a Brownells 601 lower, three prong flash hider, triangle charging handle, and repro (cause I’m not rich) Green handguards grip and stock. (OK, and proper pins, mag release, bolt catch, and ejection port cover... crap need to work more OT)

This is still the first rifle I’ve owned that seemed to come complete with an automatic soundtrack.

I’ve had White Rabbit, Paint it Black, and Tracks of My Tears playing on repeat while cleaning and tearing it apart...

Bill R
 
Posts: 1117 | Location: Wet side of WA | Registered: October 24, 2008Reply With QuoteReport This Post
Hop head
Picture of lyman
posted Hide Post
and take the Carbine sling off and get a Seatbelt nylon sling for it



https://www.chesterfieldarmament.com/

 
Posts: 10410 | Location: Beach VA,not VA Beach | Registered: July 17, 2007Reply With QuoteReport This Post
Member
Picture of 4859
posted Hide Post
Colt SP1?


-----------------------------
Always carry. Never tell.
 
Posts: 5772 | Location: Montana  | Registered: May 13, 2008Reply With QuoteReport This Post
Member
posted Hide Post
That looks very good. How does it feel?
 
Posts: 6633 | Location: Virginia | Registered: December 23, 2010Reply With QuoteReport This Post
Page late and a dollar short
posted Hide Post
You are further along than I. Only have the early brown stocks and the upper from Brownells and an Anderson lower.


-------------------------------------——————
————————--Ignorance is a powerful tool if applied at the right time, even, usually, surpassing knowledge(E.J.Potter, A.K.A. The Michigan Madman)
 
Posts: 8066 | Location: Livingston County Michigan USA | Registered: August 11, 2002Reply With QuoteReport This Post
Wait, what?
Picture of gearhounds
posted Hide Post
Nice- good to see the furniture actually matches, especially the pre-trapdoor short LOP stock.

I built A1 from all original parts, save the Palmetto lower. As an A1, the birdcage is correct, as is the teardrop forward assist.





“Remember to get vaccinated or a vaccinated person might get sick from a virus they got vaccinated against because you’re not vaccinated.” - author unknown
 
Posts: 15501 | Location: Martinsburg WV | Registered: April 02, 2011Reply With QuoteReport This Post
Frangas non Flectes
Picture of P220 Smudge
posted Hide Post
Very nice. Love them without a forward assist. It'll look even better with the slick side lower.

quote:
Originally posted by 4859:
Colt SP1?


The fenced lower says it isn't.


______________________________________________
Carthago delenda est
 
Posts: 17059 | Location: Sonoran Desert | Registered: February 10, 2011Reply With QuoteReport This Post
Old Air Cavalryman
Picture of ARMT Guy
posted Hide Post
Did someone say SP1?





"Also I heard the voice of the Lord saying who shall I send, and who will go for us? Then said I, here am I, send me."




 
Posts: 7464 | Location: Georgia | Registered: February 19, 2005Reply With QuoteReport This Post
Member
posted Hide Post
stylophiles - shouldn't the background soundtrack include Creedence Clearwater's Run Through the Jungle?


You knew the job was dangerous when you took it, Fred! - Henry Cabot Henhouse III, aka "SuperChicken"
 
Posts: 132 | Registered: March 25, 2009Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by P220 Smudge:
Very nice. Love them without a forward assist. It'll look even better with the slick side lower.

quote:
Originally posted by 4859:
Colt SP1?


The fenced lower says it isn't.


The upper is Brownells Retro 601, the lower is just a plain Jane Aero Precision. I’ve got a Brownells Retro 601 lower that I will be swapping on, I’m just now starting the search for as many of the correct small parts as I can find. I want to switch out for a chrome smooth side BCG for certain, the other stuff might take a while!

I think I will move this stock set to an early A1 build and try to fix up the color on a set of the Brownells green stocks. Set it up as a project AGILE rifle.

Bill R
 
Posts: 1117 | Location: Wet side of WA | Registered: October 24, 2008Reply With QuoteReport This Post
Member
posted Hide Post

My SP1/M-16 Clone is a great rifle that works nicely and is not picky about ammo or much else.
Enjoy it.
It's an RRA lower with all RRA stock trigger group.
The upper is a surplus m-16 Colt woth a 1/12 colt barrel that eats up 55grn fmj's.
U-S Anodizing matched it all up and did a GREAT job. Here's the "before":

The furniture is all USGI and I think it pretty well replicates an M-16A1 Viet Nam era rifle.

I found a matt chrome bolt group to go with it, and it runs like a top.
 
Posts: 957 | Registered: March 16, 2012Reply With QuoteReport This Post
Frangas non Flectes
Picture of P220 Smudge
posted Hide Post
quote:
Originally posted by stylophiles:
quote:
Originally posted by P220 Smudge:
Very nice. Love them without a forward assist. It'll look even better with the slick side lower.

quote:
Originally posted by 4859:
Colt SP1?


The fenced lower says it isn't.


The upper is Brownells Retro 601, the lower is just a plain Jane Aero Precision. I’ve got a Brownells Retro 601 lower that I will be swapping on, I’m just now starting the search for as many of the correct small parts as I can find. I want to switch out for a chrome smooth side BCG for certain, the other stuff might take a while!

I think I will move this stock set to an early A1 build and try to fix up the color on a set of the Brownells green stocks. Set it up as a project AGILE rifle.

Bill R


Yeah, that should turn out quite nice and it sounds like you’ve definitely got it all plotted out. I’d be interested in seeing the after pics once you get it done.

A while back, I was working on a deal with a friend for a Colt 604 clone with a GI upper that kinda fizzled out and fell through. That would have been a nice one to snag, and you’re not too far off from that config now. The feel of those older Colt configurations, A1 and prior, is definitely a different animal from what the modern AR has developed into.


______________________________________________
Carthago delenda est
 
Posts: 17059 | Location: Sonoran Desert | Registered: February 10, 2011Reply With QuoteReport This Post
Member
posted Hide Post
So.... how was my day?

Reprofiling a bolt catch!

Way more work than I thought, that’s some tough steel!




Looking a bit better on the Brownells 601 lower...


Just need the chrome BCG, triangle charging handle, re-do the mag release to horizontal grooves, and sort out all the pins to the correct style with center holes. And find a first model three prong flash hider.

And figure out the stock and handguards. I keep hearing that the Brownells green ones are not a good color match, so might be some painting in my future.

Well, like I tell my wife, it’s cheaper than strippers and coke...

Bill R
 
Posts: 1117 | Location: Wet side of WA | Registered: October 24, 2008Reply With QuoteReport This Post
Member
posted Hide Post
Getting closer....
Got a little package with a chrome slick side BCG and flat forward pin from Brownells today!



Bill R
 
Posts: 1117 | Location: Wet side of WA | Registered: October 24, 2008Reply With QuoteReport This Post
Hop head
Picture of lyman
posted Hide Post
quote:
Originally posted by stylophiles:
So.... how was my day?

Reprofiling a bolt catch!

Way more work than I thought, that’s some tough steel!




Looking a bit better on the Brownells 601 lower...


Just need the chrome BCG, triangle charging handle, re-do the mag release to horizontal grooves, and sort out all the pins to the correct style with center holes. And find a first model three prong flash hider.

And figure out the stock and handguards. I keep hearing that the Brownells green ones are not a good color match, so might be some painting in my future.

Well, like I tell my wife, it’s cheaper than strippers and coke...

Bill R


looks like the mag catch is in too deep,

need to back it out till the button is flush with the screw



https://www.chesterfieldarmament.com/

 
Posts: 10410 | Location: Beach VA,not VA Beach | Registered: July 17, 2007Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by lyman:

looks like the mag catch is in too deep,

need to back it out till the button is flush with the screw


Yeah, I went a turn too far, thanks to having to wrestle with it because I forgot to install the mag button before the bolt catch.... I’ve got to pull it out anyway to replace with one with the correct horizontal pattern.

Bill R
 
Posts: 1117 | Location: Wet side of WA | Registered: October 24, 2008Reply With QuoteReport This Post
Page late and a dollar short
posted Hide Post
Advice needed. Does anybody see any problem with removing the "fence" on the right side of an Anderson lower? I've got a friend with a mill that can do the deed and a 45 dollar lower sitting here.


-------------------------------------——————
————————--Ignorance is a powerful tool if applied at the right time, even, usually, surpassing knowledge(E.J.Potter, A.K.A. The Michigan Madman)
 
Posts: 8066 | Location: Livingston County Michigan USA | Registered: August 11, 2002Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by shovelhead:
Advice needed. Does anybody see any problem with removing the "fence" on the right side of an Anderson lower? I've got a friend with a mill that can do the deed and a 45 dollar lower sitting here.


I don’t see any problem with it. If you go to the retro forum on AR15.com you can see some of that work done by folks.
 
Posts: 4024 | Registered: January 17, 2007Reply With QuoteReport This Post
Page late and a dollar short
posted Hide Post
357fuzz, thank you for your response and that forum tip.

I just started collecting bits and pieces, I went with the brown furniture kit. So far only have the stripped lower and upper and furniture. I have a friend that is advising me also, ex-SF Vietnam era.


-------------------------------------——————
————————--Ignorance is a powerful tool if applied at the right time, even, usually, surpassing knowledge(E.J.Potter, A.K.A. The Michigan Madman)
 
Posts: 8066 | Location: Livingston County Michigan USA | Registered: August 11, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    The start of an early M16 clone

© SIGforum 2024