SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    What is the device in the muzzles of these rifles? (Afghan National Army)
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
What is the device in the muzzles of these rifles? (Afghan National Army) Login/Join 
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted
I ran across this picture (date unknown) of Afghan National Army soldiers in what must be "dry" practice, because you wouldn't want to actually fire the rifle.



It is evidently some kind of muzzle plug, but why so elaborate, or even have it at all?
 
Posts: 27916 | Location: Johnson City, TN | Registered: April 28, 2012Reply With QuoteReport This Post
Member
posted Hide Post
Blank adapters, with these installed the weapon will cycle normally during training.
 
Posts: 1755 | Location: El Paso, Texas | Registered: January 05, 2009Reply With QuoteReport This Post
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted Hide Post
quote:
Blank adapters

OK, that makes sense. A blank would need something to build up some back pressure to push the bolt back. Does anything actually go into the bore, or does it just cap off the end of the flash hider? And it would need to be large and brightly colored so they don't forget to take it back out.
 
Posts: 27916 | Location: Johnson City, TN | Registered: April 28, 2012Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by egregore:
quote:
Blank adapters

OK, that makes sense. A blank would need something to build up some back pressure to push the bolt back. Does anything actually go into the bore, or does it just cap off the end of the flash hider? And it would need to be large and brightly colored so they don't forget to take it back out.


The bore needs to be plugged to trap the gas. The BFA has an insert that goes into the end of the barrel.

https://www.amazon.com/UTG-Int...daptor/dp/B00AAVE4EW
 
Posts: 3335 | Location: South FL | Registered: February 09, 2007Reply With QuoteReport This Post
Old Air Cavalryman
Picture of ARMT Guy
posted Hide Post
Yup.

Blank Firing Adapters. In our military, these would typically be used in conjunction with MILES gear, ( military laser tag ) for force on force training.

The MILES laser firing device would mount to the barrel just behind the muzzle/BFA and would activate and fire off a burst of laser fire when the weapon fired a blank round.




"Also I heard the voice of the Lord saying who shall I send, and who will go for us? Then said I, here am I, send me."




 
Posts: 7464 | Location: Georgia | Registered: February 19, 2005Reply With QuoteReport This Post
Now and Zen
Picture of clubleaf206
posted Hide Post
And the BFD is bright orange so that (ostensibly) the user notices it and removes it before returning to use live ammunition. Originally a BFD was manufactured that fit inside the flash hider. Sometimes it wasn’t noticed that it was still in place when a magazine with live rounds was loaded and the trigger pull. Hilarity ensued.


___________________________________________________________________________
"....imitate the action of the Tiger."
 
Posts: 12178 | Location: The untamed wilds of Kansas | Registered: August 25, 2001Reply With QuoteReport This Post
Fighting the good fight
Picture of RogueJSK
posted Hide Post
quote:
Originally posted by clubleaf206:
Originally a BFD was manufactured that fit inside the flash hider. Sometimes it wasn’t noticed that it was still in place when a magazine with live rounds was loaded and the trigger pull. Hilarity ensued.


 
Posts: 32486 | Location: Northwest Arkansas | Registered: January 06, 2008Reply With QuoteReport This Post
Member
Picture of Rawny
posted Hide Post
How come ARs in the movies don't need them to cycle?
 
Posts: 2659 | Location: San Hozay, KA | Registered: August 09, 2005Reply With QuoteReport This Post
Veteran of the
Psychic Wars
posted Hide Post
quote:
Originally posted by Rawny:
How come ARs in the movies don't need them to cycle?


The guns in the movies are modified so that:

a) the barrel is such to provide sufficient back pressure for cycling...

or

b) there is a blank firing adapter built into the muzzle device...


__________________________
"just look at the flowers..."
 
Posts: 1294 | Location: The end of the Earth... | Registered: March 02, 2002Reply With QuoteReport This Post
Member
Picture of PGT
posted Hide Post
Check out Movie Armaments Group (MAG) on social
Media. They post cool stuff
 
Posts: 3074 | Registered: December 21, 2014Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by RogueJSK:

Look man, I ain't fallin' for no banana in the tailpipe.
 
Posts: 7866 | Location: Colorado | Registered: January 26, 2008Reply With QuoteReport This Post
Old Air Cavalryman
Picture of ARMT Guy
posted Hide Post
quote:
Originally posted by fritz:
quote:
Originally posted by RogueJSK:

Look man, I ain't fallin' for no banana in the tailpipe.


Big Grin




"Also I heard the voice of the Lord saying who shall I send, and who will go for us? Then said I, here am I, send me."




 
Posts: 7464 | Location: Georgia | Registered: February 19, 2005Reply With QuoteReport This Post
Member
posted Hide Post
couple of nice things about training with blanks:

you get to train muzzle / trigger discipline because if someone screws up you hear the 'POP' and its a indicative of fire disciple-- basically it enhances / reinforces weapon discipline

you get at least SOME feedback in terms of volume of fire from participating elements - versus a bunch of guys yelling 'bang bang bang' or perhaps 'pew pew pew'

less dangerous - intermediate level - feedback to incorporate into the training without the concerns of live ammo

it allows training during mock assaults to practice reloading, clearing malfunctions, etc - ie manual of arms under pressure

a couple BAD things:

they are notorious for creating stoppages because they are under-powered and even with the BFA not much gas is created making for MANY malfunctions compared to live ammunition

after a session firing several mags of blanks your weapon will be VERY dirty due to ALL the elements being blown into the receiver (the barrel is plugged)

there are better systems - like Simunitions - in training actual marksmanship short of live ammo

you have to be extremely militant in the separation / control of live ammo vs. blank ammo in a training environment


--------------------------------------------


Proverbs 27:17 - As iron sharpens iron, so one man sharpens another.
 
Posts: 8940 | Location: Florida | Registered: September 20, 2004Reply With QuoteReport This Post
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted Hide Post
The one in front must not be actually "firing" the rifle; maybe he is waiting for a signal or something. If he is, he won't hit anything like that.
 
Posts: 27916 | Location: Johnson City, TN | Registered: April 28, 2012Reply With QuoteReport This Post
Not really from Vienna
Picture of arfmel
posted Hide Post
No need to aim. If it’s Allah’s will, his bullet will strike the enemy.

An additional advantage of the use of blanks for training in Asscrackistan is that it reduces the likelihood of the ANA fragging their instructors.
 
Posts: 26892 | Location: Jerkwater, Texas | Registered: January 30, 2007Reply With QuoteReport This Post
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted Hide Post
quote:
No need to aim. If it’s Allah’s will, his bullet will strike the enemy.

Big Grin He can also get his training in while not cutting into his prayer time.
 
Posts: 27916 | Location: Johnson City, TN | Registered: April 28, 2012Reply With QuoteReport This Post
Member
Picture of ksss
posted Hide Post
quote:
Originally posted by Sig209:
couple of nice things about training with blanks:

you get to train muzzle / trigger discipline because if someone screws up you hear the 'POP' and its a indicative of fire disciple-- basically it enhances / reinforces weapon discipline

you get at least SOME feedback in terms of volume of fire from participating elements - versus a bunch of guys yelling 'bang bang bang' or perhaps 'pew pew pew'

less dangerous - intermediate level - feedback to incorporate into the training without the concerns of live ammo

it allows training during mock assaults to practice reloading, clearing malfunctions, etc - ie manual of arms under pressure

a couple BAD things:

they are notorious for creating stoppages because they are under-powered and even with the BFA not much gas is created making for MANY malfunctions compared to live ammunition

after a session firing several mags of blanks your weapon will be VERY dirty due to ALL the elements being blown into the receiver (the barrel is plugged)

there are better systems - like Simunitions - in training actual marksmanship short of live ammo

you have to be extremely militant in the separation / control of live ammo vs. blank ammo in a training environment


--------------------------------------------



No joke one dirtying up a weapon. Typically guys will fire very few through the rifle if they can avoid it. Once it is dirty all bets are off, but you can walk through the hills of Camp Pendleton and find two hundred round bandolier of blank SAW ammo and individual 5.56 rounds discarded unfired. No one likes shooting it especially without MILES gear. You will spend a day getting the rifle back to spotless. Firing it is only marginally more fulfilling than yelling PEW! PEW!
 
Posts: 390 | Location: idaho | Registered: May 13, 2003Reply With QuoteReport This Post
Member
Picture of sigcrazy7
posted Hide Post
That is a specially designed device to ensnare cammo netting ensuring your chow ends up on the ground.



Demand not that events should happen as you wish; but wish them to happen as they do happen, and you will go on well. -Epictetus
 
Posts: 8212 | Location: Utah | Registered: December 18, 2008Reply With QuoteReport This Post
Live for today.
Tomorrow will
cost more
Picture of motor59
posted Hide Post
Anybody else been around long enough to know how they accomplished this with the CAR-15 variant?




suaviter in modo, fortiter in re
 
Posts: 3141 | Location: Exit 7 NJ | Registered: March 21, 2005Reply With QuoteReport This Post
Fighting the good fight
Picture of RogueJSK
posted Hide Post
quote:
Originally posted by motor59:
Anybody else been around long enough to know how they accomplished this with the CAR-15 variant?


Same style of blank firing adapter. That system works on any AR15/M16 variant with a standard birdcage flashider, as well as on some other 5.56 weapons like the M249.

Here's a CAR-15 with one:


While they'll work with the standard BFAs as shown above, at some point, they tweaked the BFA design for carbines to have a slightly larger gas bleed hole than the standard rifle BFAs, to reduce wear and increase reliability when used with carbines. This version is usually painted a different color (typically yellow instead of red) to help easily differentiate between carbine and rifle variants.

Here are some M4s with carbine-specific yellow BFAs:



Or, if you're talking about the early XM177 version of the CAR-15 with the elongated moderator, they were not able to utilize a BFA. But I doubt any of those were issued in training anyway.

 
Posts: 32486 | Location: Northwest Arkansas | Registered: January 06, 2008Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    What is the device in the muzzles of these rifles? (Afghan National Army)

© SIGforum 2024