SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    How are Palmetto State Armory ARs
Page 1 2 3 
Go
New
Find
Notify
Tools
Reply
  
How are Palmetto State Armory ARs Login/Join 
Member
posted Hide Post
I respect PSA- and accept that mistakes happen.

I have built 3 or 4 ARs on their products, for fun.

I've sold most of them by now though.

Quality was acceptable to me- as I am not an AR Expert. It looked good and worked, at the right price.


I did have one issue, and they really impressed me.


Last year, I noticed that the front sight block was out of time/alignment on the upper, and I didn't notice this for over 4 years. [I get out to use it maybe once a year- and there were some rough years at work that swallowed time.]

I contacted them about it, but couldn't find my receipt. They searched their system and found it, from around 2012-4, I forget- but it was a LONG time ago.

They said- 'ship it in': so I did.

They sent me a new upper within 2 weeks of receipt of my old one.

I was VERY happy!


Sig P226, P220 Carry Stainless Elite, and a bunch of non-sigs. Smile
 
Posts: 537 | Location: South San Joaquin Valley, CA | Registered: September 21, 2010Reply With QuoteReport This Post
Member
Picture of Rustpot
posted Hide Post
They've had uppers with CHF barrels and Geissele rails and gas blocks in a few different lengths lately. If I was in the market for a knockaround gun I probably would have grabbed one.

I have a 10.5" CHF "machine gun steel" barreled upper from PSA that's on a somewhat Mk18 Mod0 pistol build. The Anderson lower it's on is terribly out of spec in a few spots. I originally built it for something like $350, it's since crept up closer to $600 with the Aimpoint and some accessorizing. poverty pony deluxe.


Edit:
Here are the Geissele railed uppers.

10.5
https://palmettostatearmory.co...er-no-bcg-or-ch.html
16"
https://palmettostatearmory.co...er-no-bcg-or-ch.html
8.5" 300blk with a little tucked back barrel
https://palmettostatearmory.co...er-no-bcg-or-ch.html
And a 18" rifle gas, .223 wylde, Mk13 rail
https://palmettostatearmory.co...r-w-o-bcg-or-ch.html
 
Posts: 5720 | Location: Romeo, MI | Registered: January 03, 2009Reply With QuoteReport This Post
Member
posted Hide Post
I have 4 PSA's as of now.

10.5", 7" 16" dissapaptor in 5.56, and a 4.5" 9mm.

I have a few hundred rounds through each one. No issues. The 7" marauder pistol, and the 9mm are the most fun.

Hey, for the money you can't beat it.
If something breaks they are guaranteed for life, and replacement parts from your choice of manufacture, have never been cheaper.
 
Posts: 111 | Location: St. Petersburg FLorida | Registered: April 27, 2011Reply With QuoteReport This Post
Donate Blood,
Save a Life!
Picture of StarTraveler
posted Hide Post
If you are interested in building your own using Palmetto State Armory parts or using one of their lower kits with the upper of your choice, their PSA AR-15 Safe/Fire Lower is on sale right now for $29.99.

https://palmettostatearmory.co...ontent=12%3a00+Email


***

"Aut viam inveniam aut faciam (I will either find a way or make one)." -- Hannibal Barca
 
Posts: 1559 | Location: Georgia | Registered: July 19, 2008Reply With QuoteReport This Post
Oriental Redneck
Picture of 12131
posted Hide Post
quote:
Originally posted by RHINOWSO:
I mean, PSA ARs are first and foremost CHEAP.

While some think that a $400 AR is the same as all the other ARs, the cuts have to come somewhere in the business. Maybe it's test firing procedures, maybe it's customer service, but it's gotta come from somewhere. Likely also in materials / construction, but of course chest thumpers will say FN BARRELS GD-it, and I won't argue whatever point that attempts to make.

So to buy a cheap AR upper and expect to get the red carpet rolled out for a problem is likely expecting a bit much.

Good, Fast, Cheap <--- The rule of thumb is "Pick 2".

And yes, PSA makes what many consider good to serviceable ARs that turn ammunition into noise, empty brass, and holes on targets.

I agree with all this, but, don't forget, top tier companies selling supposedly top tier guns can release shitty products and have poor customer service, also.


Q


2016 MAGA ---> 2020 KAG
* P228 factoids *


 
Posts: 18050 | Location: TEXAS | Registered: September 04, 2008Reply With QuoteReport This Post
Member
posted Hide Post
I’ve got a few I’ve been messing with, and so far, I’ve been impressed. Actually not bad triggers, and everything has been in spec and works so far... Haven’t done any 100K round torture tests yet, but at least one of these is going to get run through the wringer with a few thousand over the summer, so I’m interested to see how everything holds up..
Bill R
 
Posts: 802 | Location: Wet side of WA | Registered: October 24, 2008Reply With QuoteReport This Post
Member
Picture of kimberkid
posted Hide Post
I've bought 2 or 3 of their LPK's less trigger & grip, they were on sale for $29 and I've bought some of their nickle-boon bolt/carrier ...

... everything fit so I was happy.

If I were to start from zero, I'd probably have a couple in the stable ... I like CHF barrels and cool logo so maybe I'd have one of their crossed cannons and lately I've been thinking of a "Confirmed" lowers but I've already got several lowers with cool logos I've yet to build just because I've pretty much got all the uppers I want ... I'm thinking about building a Grendal but I'd rather have a 6.5 in a 223 case, or maybe both! But for punching paper it doesn't make much sense when I can reload 223 so much cheaper!


If you really want something you'll find a way ...
... if you don't you'll find an excuse.

I'm really not a "kid" anymore ... but I haven't grown up yet either Wink
 
Posts: 5037 | Registered: January 11, 2007Reply With QuoteReport This Post
That rug really tied
the room together.
Picture of bubbatime
posted Hide Post
People see the low prices and think the quality must be low. Have these people never heard of the Walmart effect? They get parts cheaper because they buy 50,000 at a time. Their per unit cost on parts is lower than most manufacturers. Not to mention, they make the majority of their own barrels and free float rails in house. It probably cost them $10 to make a barrel, and $10 to make an aluminum free float rail, so of course they can be competitive and undercut other companies.


______________________________________________________
Often times a very small man can cast a very large shadow
 
Posts: 5333 | Location: Floriduh | Registered: October 16, 2004Reply With QuoteReport This Post
Leatherneck
posted Hide Post
I’ve built a couple for myself, a 10.5” pistol and a 16” carbine length rifle, and a couple more rifles with my friends for them and we had no issues with installation of any parts. I’ve only got a few hundred rounds through each but no problems with either.

I’m not a huge fan of shooting .223/5.56 out of the AR so mine won’t be seeing any high round counts. I might build a .22 lr from PSA though and that I’d shoot a lot.




Georgia Carry MemberNRA Lifetime Member

“With no police to protect you, did you own a gun? Did your neighbor?” - The Division 2

“Everybody wants a Sig in the sheets but a Glock on the streets.” -bionic218 04-02-2014
 
Posts: 13240 | Location: Florida | Registered: May 07, 2008Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3  
 

SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    How are Palmetto State Armory ARs

© SIGforum 2019