Originally posted by hrcjon: In my neck of the woods, the price for a few at Ace has exceeded the price of a box of 50 from mcmaster in just about every case. So if price rather than actually having asap is your issue. check...
I discovered this when I rebuilt an FJ-40, and needed some replacement metric nuts and bolts. A bag or box from McMaster is very little more than 2 or 3 pieces from the local hardware store. So I started buying all different sizes that way. Sure, you have some left over. Now that the FJ is sold, I have 5 large compartmented boxes of all sizes of metric nuts and bolts, from M3 to M12. I have many more of them on hand than I do SAE stuff, so when I need a nut/bolt for a repair job or something new I'm making, I take it out of my metric stash. Of course, the FJ-40 project was a good excuse for acquiring several toolbox drawers full of metric tools, too.
all your sig are belong to us
Posts: 9354 | Location: South Congress AZ | Registered: May 27, 2006
I mounted an RMSc to my P365XL using the FullerKreg M3 x 8mm button head socket cap screws from Amazon. I had to buy a bag of 100, but it was still only $7 with free Prime shipping. I’m pretty sure that’s the size you’ll need, and I haven’t had any problems so far, but you can also order x 10mm, or x 12mm like you asked, for about the same price from the link below.