SIGforum
New Wilson Combat P320 grip frames
February 01, 2020, 06:41 PM
Sunset_VaNew Wilson Combat P320 grip frames
quote:
Originally posted by RogueJSK:
quote:
Originally posted by Sunset_Va:
I wish they had shown a completed pistol with their frame.
They do, on the webpages linked in the OP.
I missed that picture, thank you for posting it.
I don't have a P320, but if I did, I would buy one of those Wilson grip frames. It just changes it for the better, in looks, and I,m sre in grip too.
美しい犬
February 01, 2020, 06:48 PM
sigarms229I might have to try one out. Thanks for sharing.
Sometimes, you gotta roll the hard six
February 01, 2020, 07:12 PM
dehughesI am tempted to grab one of their manual safety carry size versions, but I don’t see what it would offer that my X frame does not. Hopefully someone here who has an X frame will grab one and post a comparison.
________________
tempus edax rerum
February 01, 2020, 07:19 PM
RogueJSKquote:
Originally posted by dehughes:
Hopefully someone here who has an X frame will grab one and post a comparison.
I plan to, once the black non-safety model is back in stock.
February 01, 2020, 07:28 PM
arcwelderquote:
Originally posted by RHINOWSO:
Soon you'll be able to make a P320 without anything from SIG!
Like many a Glock product.
Market competition and improvement, all good. Considering the gun is just the module, they lend themselves to even more customization than Glorps.
Also good, watching people who spend thousands on aftermarket parts for these eschew expensive 1911s that "don't work without modification" or somesuch. Pot/kettle and all that.
Arc.
______________________________
"Like a bitter weed, I'm a bad seed"- Johnny Cash
"I'm a loner, Dottie. A rebel." - Pee Wee Herman
Rode hard, put away wet. RIP JHM
"You're a junkyard dog." - Lupe Flores. RIP
February 01, 2020, 07:51 PM
David LeeAnd speaking of the 1911, the Wilson module has quite a familiar profile. One of the features of the warmed over p250 which is the p320 which from the start set off my strange feeling button, is that darn handle. One on each side of a Croc pot would be a perfect fit. Someones CAD mistake I am sure. Its just odd. The Wilson part looks more like a pistol frame. They've even rounded its trigger guard nicely. The Wilson frame has no seam lines on it either.
February 01, 2020, 08:13 PM
Keystonerquote:
Originally posted by David Lee:
The Wilson frame has no seam lines on it either.
No, you can see a seam down the middle on the underside of the whole frame. But damn I like the esthetics of that frame!
Year V February 01, 2020, 08:15 PM
ALLEGRO1957I already carry a 17rd mag (X Grip) on my P320cRX.
Will my slide fit on the Wilson X frame?
Be a productive citizen but always be prepared
February 01, 2020, 08:21 PM
David Leequote:
Originally posted by Keystoner:
quote:
Originally posted by David Lee:
The Wilson frame has no seam lines on it either.
No, you can see a seam down the middle on the underside of the whole frame. But damn I like the esthetics of that frame!
The black module in the 2nd pic is factory Sig. The FDE Wilson shows no seam. The Wilson modules in the OPs link do show a seam line.
February 01, 2020, 09:49 PM
warbird1Picked up a compact in 40 at a pawn shop a couple of weeks ago. Looks like new. Ordered the tan grip module without safety earlier this evening on the Wilson site. Looking forward to having it in the carry version.
If I want it... I need it !
February 01, 2020, 10:47 PM
Lefty SigOrdered a black carry w/safety cut for my M17 nitron. Seems worth a try...
February 02, 2020, 12:26 PM
1s1kquote:
Originally posted by warbird1:
Picked up a compact in 40 at a pawn shop a couple of weeks ago. Looks like new. Ordered the tan grip module without safety earlier this evening on the Wilson site. Looking forward to having it in the carry version.
How much are they?
February 02, 2020, 06:04 PM
MWCThat's a nice looking and functional looking grip. When they come out with a compact I may grab one.
___________________________
Originally posted by Psychobastard:
Well, we "gave them democracy"... not unlike giving a monkey a loaded gun.
February 03, 2020, 10:38 PM
beltfed21I ordered a black full sized for my VTAC. Should be here Wednesday. The Wilson module looks to be griper than the X5 that is on the pistol now. Also, the extra deep cutout at the back of the trigger guard should allow for the hand to ride slightly higher.
I have a Wilson EDC X9 and a 1911 XTAC both of which use the same layout on the grips like this new module. I really like the fit and feel! So we'll see how it goes.
********************************************
"On the other side of fear you will always find freedom"
February 04, 2020, 04:18 AM
RogueJSKBack in stock.
February 04, 2020, 05:23 PM
Robert JohnsonI like this. When they make one for the manual safety M17 I will try them out.
NRA LIFE MEMBER - NSSF MEMBER
www.RobertRTG.com for the best prices on HK, AK, MG42, Uzi parts and more.
February 04, 2020, 05:36 PM
CQB60Shrewd business move on the part of WC..
______________________________________________
Life is short. It’s shorter with the wrong gun…
February 04, 2020, 07:53 PM
deadmanmikeI ordered a tan one for my M17 that may replace the X-Grip module I have on there now. Once it arrives, I'll post some pics.
=============
Certified Sig P-Series Armorer
Certified AR-15/M16/M4 Armorer
Certified 1911 Armorer
Certified Glock Armorer
Certified Sig P320 Armorer
Certified Glock Advanced Armorer
Certified MPX Armorer
Certified MCX Armorer
February 04, 2020, 08:26 PM
gearhoundsI’m interested in a compact frame but- from the FAQ at the website-
“Will you offer a Compact (15rd) length grip?
Not at this time, however there are plans to support this in the future.”
Anyone wanting a subcompact, Wilson says no intentions to produce one at this point.
“Remember to get vaccinated or a vaccinated person might get sick from a virus they got vaccinated against because you’re not vaccinated.” - author unknown February 05, 2020, 12:05 PM
The VikingToo bad they did not turn out one with a safety. I would have bought it.