SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Who's got 5+ P226 magazines and a set of calipers?
Go
New
Find
Notify
Tools
Reply
  
Who's got 5+ P226 magazines and a set of calipers? Login/Join 
Member
Picture of vthoky
posted
I'm working on designing and 3D printing a gadget for my brother, and I need to know some basic dimensions on the standard P226 (9mm) magazine.

The dims I'm after are the width of the magazine body, the width of the base plate, and the distance from the base plate to where it tapers at the "top."

Thank you, SF, for your help.

(There's a reason I ask who's got five or more....) Wink




God bless America.
 
Posts: 13425 | Location: The mountainous part of Hokie Nation! | Registered: July 15, 2007Reply With QuoteReport This Post
Member
Picture of 1KPerDay
posted Hide Post
Do they have to be made by SIG? I have like 9 mec gars in various flavors...


---------------------------
My hovercraft is full of eels.
 
Posts: 3181 | Registered: February 27, 2013Reply With QuoteReport This Post
Member
Picture of 1KPerDay
posted Hide Post
Do you want the distance from the REAR bottom of the mag to the beginning of the taper along the rear/sides as you go up, or to the stop of the taper near the feed lips, or what?


---------------------------
My hovercraft is full of eels.
 
Posts: 3181 | Registered: February 27, 2013Reply With QuoteReport This Post
Member
Picture of 1KPerDay
posted Hide Post
SIG dovetail 9mm mag width .812-.815”
Baseplate width .995-.999”
Distance from bottom including baseplate to the bottom of the small taper Just below the feed lips approx 4.588”
Distance from bottom to the start of the large taper moving up approx 3.794”

Second example dovetail:
Width .809-.813”
Width of baseplate .998”-1.001”
Others are inexact points enough to be user error


---------------------------
My hovercraft is full of eels.
 
Posts: 3181 | Registered: February 27, 2013Reply With QuoteReport This Post
Member
Picture of 1KPerDay
posted Hide Post
Mec Gar SP226-17 stainless, metal baseplate

Width .805-.807”
Baseplate width 1.003-1.005”
Bottom caliper jaw on baseplate and top jaw point on beginning of taper going up approx 3.812”
Same but point on the start of the sharp taper below the lips 4.587”

Second stainless mec gar width .810”
Baseplate width 1.004”
Taper measurements not accurate or repeatable enough to be useful.

Mec gar 18-round AFC coated, plastic baseplate MG-P226-9:
Width .807-.810”
The rest will not be useful measurements due to the different baseplate which is 1.141” wide and approx .270” thick.

Hope this helps


---------------------------
My hovercraft is full of eels.
 
Posts: 3181 | Registered: February 27, 2013Reply With QuoteReport This Post
Member
Picture of vthoky
posted Hide Post
That's exactly the information I needed, 1K, thank you!

Thank you, too, for pointing out the mild differences in width by mag manufacturer.

I'll email you this evening.




God bless America.
 
Posts: 13425 | Location: The mountainous part of Hokie Nation! | Registered: July 15, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Who's got 5+ P226 magazines and a set of calipers?

© SIGforum 2024