SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Sighting in my new P365
Go
New
Find
Notify
Tools
Reply
  
Sighting in my new P365 Login/Join 
Member
posted
My new P365SAS was badly misaligned as far as aim was concerned. I ordered a laser bore sighter, and found it was a foot high at 12 feet, so I removed the Meprolight sight and put 2 shims under the front end, returned the sight and screwed it down. Haven't shot it yet as range is closed, but sighting it to a wall shows it now to be dead on.
Have to wait until range reopens to test my work, if it's still NG, going back to Sig.
 
Posts: 43 | Location: Hilton Head Island, SC | Registered: August 17, 2018Reply With QuoteReport This Post
Member
posted Hide Post
Mine seems to shoot low with the xray sight. I am probably going to get a #8 to align it better for me. I feel your pain.
 
Posts: 6845 | Location: Treasure Coast,Fl. | Registered: July 04, 2003Reply With QuoteReport This Post
Member
posted Hide Post
What's a #8? I feel stupid.
 
Posts: 43 | Location: Hilton Head Island, SC | Registered: August 17, 2018Reply With QuoteReport This Post
His diet consists of black
coffee, and sarcasm.
Picture of egregore
posted Hide Post
How did you determine it shoots high? Have you actually shot the gun, determined that it does in fact hit high and used the bore sighter to verify the sight alignment? Or did you just stick a bore sighter in it? If that's what you did, the bore sighter doesn't take into account the height of the sights above the center line of the bore, or that a bullet travels in a parabolic arc, not a straight line.
 
Posts: 27835 | Location: Johnson City/Elizabethton, TN | Registered: April 28, 2012Reply With QuoteReport This Post
Go ahead punk, make my day
posted Hide Post
quote:
Originally posted by Bigborgel:
My new P365SAS was badly misaligned as far as aim was concerned. I ordered a laser bore sighter, and found it was a foot high at 12 feet, so I removed the Meprolight sight and put 2 shims under the front end, returned the sight and screwed it down. Haven't shot it yet as range is closed, but sighting it to a wall shows it now to be dead on.
You are doing it all wrong.

You really have zero idea if it was off or on.

Laser boresighters suck donkey ballz IMO and I'd never go through the drama that you did to do this.

Shoot the gun, see where it hits, then go from there.

Not to mention 4 yards / 12 feet is a shitty range to zero something.
 
Posts: 45798 | Registered: July 12, 2008Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by RHINOWSO:



Laser boresighters suck donkey ballz IMO [/QUOTE]

I'm afraid I will have to differ with you on a laser boresighter. I bought a nice looking sporter built on a Mexican mauser action. It had a pictnanny rail bridging the front and rear ring. I wanted separate mount bases, and quickly learned that whoever drilled and tapped the rear ring did not get the holes aligned with the front. There simply was not enough adjustment in my Leupold scope to make up for it. My local gunsmith looked at it , and I asked if he could either fill the holes and redrill and tap or tap some offset holes in a base. He took the base and milled a little bit off one side so it tilted back, not perfectly but close. By that time I got a laser boresighter, and put the scope in a set the Burris rings that take the polymer inserts, and they make eccentric inserts so you can actually center your scope and zero the gun by turning those inserts. Using a laser boresighter I actually got the gun almost zeroed at about 150 yards . No idea how well it would work in a short range handgun.
 
Posts: 45 | Registered: May 19, 2006Reply With QuoteReport This Post
Member
posted Hide Post
From what I have learned here, the # designation relates to the height of the sight itself. There is a #6 on it now,the xray, as the sight picture is for combat sighting. I hope I didn't confuse you more. There is a ton of people here with a lot of good info. to share.
 
Posts: 6845 | Location: Treasure Coast,Fl. | Registered: July 04, 2003Reply With QuoteReport This Post
Member
Picture of powermad
posted Hide Post
He has a 365 SAS with the Meprolight sight on it not the Xray3 sights.
If that sight isn't on then you're down to shimming it.
 
Posts: 1470 | Location: Portland Oregon | Registered: October 01, 2011Reply With QuoteReport This Post
Member
posted Hide Post
Reminds me of the time I hung a picture on the wall. It turned out to be a bit crooked. So I wedged a floor jack under the left side of the wall to level it out.

I agree with the others, actually shoot the damn thing first Wink

Especially with the SAS sights. Those were a hard pass for me within a fraction of a second looking at my sight picture.
 
Posts: 2679 | Location: The Low Country | Registered: October 21, 2008Reply With QuoteReport This Post
Member
posted Hide Post
I need to further explain my actions for those especially jumped ugly , I guess too much time in the house. I went to the range with my new gun, shot it at 15', 21' 25' and 30', all strikes were quite high. So I got a D-B bore sighter and sighted it in a 12' long room. It was quite high, with B-S versus the Meprolight, so I put 2 shims under the front of the sight and now the sight and the light seem to line up. Can't go to the range, it's closed, so I'll just have to wait to test my results. Continue to be ugly if you like.
 
Posts: 43 | Location: Hilton Head Island, SC | Registered: August 17, 2018Reply With QuoteReport This Post
Member
Picture of pcshooter
posted Hide Post
I had a similar experience with my P365SAS. My regular P365 was dead nuts on, but I found that even at ranges as close as 6 yds. the SAS grouping would be 5" or so high and right...and only getting worse as the targets were moved out. To test that it wasn't just me, my boss and I shot my regular P365 and then the SAS. Below is a result. The target on the left is mine, with the regular P365 in red and the SAS group in yellow. The target on the right is my boss', doing the same thing. We saw this repeatedly. I was super disappointed when I was told by SIG CS that this was an "acceptable" result for a gun that was designed for close-in engagements only. It may have been fine for them, but my confidence in carrying the gun was destroyed until I found a solution.




My "solution" was to swap out the SAS sight with an RMSc mount from Nameless Arms and properly zero it.


(photo credit @namelessarms)
 
Posts: 751 | Location: Free State of Utah | Registered: December 14, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Sighting in my new P365

© SIGforum 2024