Are there any written instructions with pictures in here, or perhaps a video. I've seen a video from Calguns.net but not very clear of the actual process but rather pointing out the 1/16 pin.
Any help would be greatly appreciated.
I'll be picking up my P226 Scorpion in 9 days! So excited.
Lastly, is this model discontinued? I don't see it on Sig's website.
If your talking about removing the magazine release button, on the bottom of button there is a small plunger called the catch stop. Push upwards to release the catch, and the mag release will spring out. But be careful the catch stop is under spring pressure and only goes in one way and it and the spring are very very small. I use a child's plastic paint brush handle thats been sharpened to push the catch stop so no scratches. For a picture look at the schematics at Brownells and Sig Sauer used to have manual for download and part schematics.
He's talking the silly mag disconnect not the mag release.
“So in war, the way is to avoid what is strong, and strike at what is weak.”
Yes, a privilege provided to Californians lol.
You’ll need to remove the locking insert from the pistol, once that’s out, it’s pretty straight forward. If you have any questions email me, I’ve taken a few out in the past.
Certified Sig P-Series Armorer
Certified AR-15/M16/M4 Armorer
Certified 1911 Armorer
Certified Glock Armorer
Certified Sig P320 Armorer
Certified Glock Advanced Armorer
Certified MPX Armorer
Certified MCX Armorer
I feel blessed that my CA-legal P226 X5 Competition has neither a mag disconnect nor an LCI.
|Powered by Social Strata|