SiG factory services

December 27, 2020, 11:35 AM

Hello,

Are the factory services offered by the sig custom shop worth the $ ?

I am contemplating having an old German SiG P226 resprung to oem spec.

Thank you in advance!

December 27, 2020, 11:45 AM

12131

Do this package. Note that round-trip shipping is extra. I have not used them for a while, but it was $55 shipping.

quote:
The SIG Service Plan Includes:

• Full disassembly of pistols down to frame and slide

• Complete detailed cleaning

• Expert factory inspection of all critical components

• Replacement of springs (recoil, slide catch lever, trigger bar, decocking lever)

• Reassembly and lubrication to factory specifications

• Installation of SIGLITE Factory Night Sights (excluding P232)

• Function test

• This service, valued at $225, is yours for just $144.95 and brings your used SIG SAUER pistol back to peak operational readiness.

December 27, 2020, 12:10 PM

Watergoat

Good deal Wonder why they don't change the hammer spring as well?

December 27, 2020, 12:18 PM

12131

quote:
Originally posted by Watergoat:
Good deal Wonder why they don't change the hammer spring as well?

They will, if necessary. The firing pin spring, also.

December 27, 2020, 12:43 PM

YooperSigs

Worth every dime. The new night sights make the deal. My last SSP took 7 days, including shipping.

December 27, 2020, 12:53 PM

FHHM213

quote:
Originally posted by Watergoat:
Good deal Wonder why they don't change the hammer spring as well?

Though not stated explicitly, they replaced every single spring in my old WG P226 last summer. They also chose to replace the take-down lever. All replaced parts & springs were returned to me.

Personally, I initially chose the basic $85 service plan since I wanted to keep my original dot-bar contrast sights. CS rep then offered a discounted $50 SRT kit install (parts & labor) - ie they are willing to combine services for a discounted total, even though the particular combo may not be listed on the website.

As above, my turnaround time was less than 10 days. Hard to beat.

December 27, 2020, 05:27 PM

226.357

I recently had them perform the SSP on a WG 220 and a 239. The 239 came back with very bright NS. A very positive experience all the way around. The 239 was back in 10 days and the 220 was back in 3, yes 3 days!! Grant it I’m only 1 state away from the mothership, but if I read the notes from the gunsmith and shipping tracking notifications correctly. They put the springs in, test fired the old girl, and had it out the same day. It doesn’t get much better than that. YMMV, but I’m a happy camper!

D.

December 27, 2020, 06:22 PM

taguin

Thank you gentlemen. Has anyone experienced having SiG needing to have a major component replaced while there for the services package ie hammer, locking block or barrel to name a few ?

December 27, 2020, 07:37 PM

Lord Vaalic

No major parts replaced for me, but I've had several pistols get the service package, including a janky P229 I picked up for super cheap. They cleaned it all up, replaced every spring, new night sights and it was like a whole different pistol when it came back.

Well worth the money

December 27, 2020, 07:38 PM

SSAreGreat

I have had some work done by SIG on their pistols such as changing the trigger, maintenance package, rebuilding a damage slide and I was very satisfied with the work. I think it is an advantage to SIG that they offer a number of services at their factory.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Democracy is 2 Wolves & a Lamb debating the lunch menu.

Liberty is a well armed Lamb!

December 27, 2020, 07:41 PM

Ronin101

Can someone link to the service. I cant find it anywhere on Sig's site

December 27, 2020, 07:42 PM

dubagel

They should also replace the dual role pins for the breach block.

December 27, 2020, 08:18 PM

12131

quote:
Originally posted by Ronin101:
Can someone link to the service. I cant find it anywhere on Sig's site

https://www.sigsauer.com/custom-works-services

January 01, 2021, 01:01 PM

Ronin101

quote:
Originally posted by 12131:
quote:
Originally posted by Ronin101:
Can someone link to the service. I cant find it anywhere on Sig's site

https://www.sigsauer.com/custom-works-services

thanks.. I bookmarked it so I would have to struggle to find it again

January 12, 2021, 12:45 PM

YooperSigs

I have a 1997 P239 I have sent in to Sig for the SSP. I will keep you all posted on the turn around time.
So far:
Went to FedEx hub on Friday, 1-8 for drop off and it was delivered to Sig today, 1-12. Delay in shipping was due to a weekend. Also: 40 minutes on hold before Sig Customer Service answered the phone.

January 12, 2021, 12:50 PM

rscalzo

Some friends work over there and they would be the ones I'd want to work on my Sig firearms.

Very long time employees.

January 13, 2021, 08:46 PM

YooperSigs

Update 1-13: My credit card has been charged.

January 15, 2021, 12:28 PM

YooperSigs

Final Update: P239 is back home. Total turnaround time is 7 days, almost to the minute. Cost was 172 bucks, with 27 of that being round trip shipping.
A plastic bag with the old parts was included with the gun.
All in all, excellent service!