SIGforum
Poll: How's your 365 doing?

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/430601935/m/4550001644

October 11, 2018, 08:00 PM
Ordnance Outsell
Poll: How's your 365 doing?
Johnny, thanks for your service and glad you got
a screaming eagle deal on your 365. Even better that you have had no issues, so far!

Holsters designated for 365 are sparse. but can tell you that Com-Tac IWB for my Kahr PM9 fits
perfectly as might other PM9 holsters. You may know
Black Point Tactical makes a couple of models for 365 and one of very few that offers a mag carrier for 365, due to unique design. RSR
does list on their website for your baseX to
order; but rarely actually have them in stock, even less so for mag carrier.

The circumstances of "new old stock" and reduced price on your 365 might indicate that they ceased production back in May, due to issues, made changes, and put them out there at that reduced price? Another possibility is that wanted to take relatively few guns and put them out there in a "closed loop" distribution, so they were kept away from usual gun dealers and the general public. Pure speculation on my part?


www.OrdnanceOutsellers.com
jerry@OrdnanceOutsellers.com

770-977-0662
October 11, 2018, 09:00 PM
Johnny 3eagles
Thanks for the holster information.



BIDEN SUCKS.

If you're goin' through hell, keep on going.
Don't slow down. If you're scared don't show it.
You might get out before the devil even knows you're there.


NRA ENDOWMENT LIFE MEMBER
October 12, 2018, 10:41 PM
sigsecondsflat
Just received mine yesterday. Dated Sept 21 2018.

Over 100 rounds with absolutely no issues. Looks as though Sig has all the issues fixed.
October 13, 2018, 06:20 AM
G-Man
Took mine (born 9/6/18) to the range again and put another couple hundred trouble free rounds through it. I absolutely love this pistol!! My Glock 26 is getting jealous.

Regarding holsters, I discovered that it fits perfectly in both my Galco leather IWB and leather pocket holsters for my Glock 42!! That’s right, the same dimensions as a 6-shot .380!!
October 13, 2018, 06:45 AM
ozzy14559
Check out vedder kydex holsters. Wife has the IWB light tuck holsters for her sig 365 and glock 43 and she loves them.
October 13, 2018, 10:26 AM
mike56
I don't see any problem in finding holsters for the 365. All the usual makers have molds by now.I'm using a ANR iwb now, waiting for a PJ any day now.
October 13, 2018, 01:01 PM
sigarms229
Another note on holsters. I'm using Glock 42 pocket and IWB holsters and they work perfectly.



Sometimes, you gotta roll the hard six
October 13, 2018, 05:16 PM
elde
Another holster recommendation: Garrett Silent Thunder GT. Premium IWB holster. I have several. The 365 holster fits mine like a glove. Adjustable retention, height & very thin.

www.giholsters.com


----------------------------------------
“The further a society drifts from truth, the more it will hate those who speak it.”
October 14, 2018, 10:09 AM
T.Webb
For a holster, I swear by Raw Dog Tactical. Google their product or check out their Facebook page. I have a number of their IWB holsters for both off duty carry and support side back-up carry.


************************************************
"Tonight, we are a country awakened to danger and called to defend freedom. Our grief has turned to anger and anger to resolution. Whether we bring our enemies to justice or bring justice to our enemies, justice will be done". {George W. Bush, Post 9/11}



October 14, 2018, 10:10 AM
FN in MT
I will second the motion from elde on the Garrett IWB rig. Mine for the 365 arrived back in July. Well worth the price and the short wait.
October 17, 2018, 01:54 PM
capone75088
New May build and shot 400 rounds yesterday. The rear slide plate slipped down three times, about every 55 rounds. This kept the slide from returning to full battery. A call to Sig and the shipping label is on the way.



This message has been edited. Last edited by: capone75088,
October 19, 2018, 12:09 PM
CharlieSW
Put another 50 rounds thru mine yesterday without a hitch. Over 300 rounds to date, and no issues after the initial break in (first 50 rounds). The mags have loosened up so that it is easier to load the full 10 and 12 round capacity. No signs of unusual wear. Accuracy is exceptional for such a small pistol and it points very well for me. My gun runs everything from 115 to 147 gr, FMJ and JHP, and it likes the 147 gr. Golden Sabre LE loads. No complaints here.


Pragmatism: the relentless pursuit of seeing things as they really are.
October 21, 2018, 09:14 AM
Roughneck6
I finally was able to pick up a blue label P365, born date September 2018. I’ve carried my Shield for over 5 years. I cleaned it up and ran a quick 150 rounds. I used a mix of 124 grain FMJ Blazer Brass, 100 grain FMJ reloads and 147 grain Winchester T-Series JHP. No issues, unbelievable accuracy, and in my hand, less felt recoil over my Shield. I’ll run another 150 rounds and begin to carry.
October 21, 2018, 04:27 PM
js1badsti
Both detroit holster and clinger holster make excellent iwb and owb holsters for the 365 and are not badly priced.
October 24, 2018, 01:22 PM
timrh23
Just broke my 2nd firing pin...dry fire with snapcaps. Born 3/10, first striker replaced May...I love the P365 but I'm getting really pissed.


October 24, 2018, 04:02 PM
Johnny 3eagles
quote:
Originally posted by timrh23:
Just broke my 2nd firing pin...dry fire with snapcaps. Born 3/10, first striker replaced May...I love the P365 but I'm getting really pissed.


Try one of these if you want: https://shop.lspi.com/Steel-Strikers_c11.htm



BIDEN SUCKS.

If you're goin' through hell, keep on going.
Don't slow down. If you're scared don't show it.
You might get out before the devil even knows you're there.


NRA ENDOWMENT LIFE MEMBER
October 24, 2018, 06:43 PM
Ordnance Outsell
Appreciate all the holster info from those who supplied it! It's one thing to buy aftermarket parts to "enhance" performance of your gun; but
IMHO, quite another to require it to make gun
safely function! Am sure there are those who disagree; but how would you like it if you had to buy some aftermarket part to make your car operate safely?


www.OrdnanceOutsellers.com
jerry@OrdnanceOutsellers.com

770-977-0662