For manufactures who don't make kydex mag carriers specifically for the 320, are there other magazines that are roughly the same size as the 320 such that those carriers will work?

quote:

Originally posted by Oat_Action_Man:
For manufactures who don't make kydex mag carriers specifically for the 320, are there other magazines that are roughly the same size as the 320 such that those carriers will work?

I don't know if other manufacturers' carriers are as widely compatible (adjustable) as Safariland's, but just picking out one single mag carrier at Safariland, the model 771, the P320 falls into size "Group 8", which also includes Beretta Cougar, Glock 17, 22, 31, 19, 23, 25, 32, 34, 35, 37, H&K P2000 & USP9C, Ruger SR9, Sig P2022, SIG Pro SP2340, S&W M&P 9C & .40C, M&P 9mm & .40, Sigma 9, 40, Sigma 9C, 40C, 9E, and XDM 9mm & .40.
 
This is the model mag carrier I prefer and use, two sizes only, one for P320 et al, and the other for single stacks (1911, P220, etc). I even use a single stack one for my P938, but I had to put about a 1/2" piece of wood in the bottom to bring the mag up high enough to grab.
 

Comp-Tac's list. The P320 is a 12.

http://www.comp-tac.com/magazi...ouch-belt-clip-10621

Based on the two lists (this and the above post) I'd bet the M&P would fit the same.

I have a Safariland for M&P45 and it works for my 9mm 320 mags.

This may help, as manufacturers think one size fits all. IMO it is better to have the mag holder larger & adjust down. Also a battery Dremel & sanding drum is helpful with CompTac as they are not consistent.

Mag Size
Mag............... Width.... Depth

Beretta 92 ............. 0.807 1.255
Sig P228/P229 9mm. 0.810 1.266
Sig P226 9mm......... 0.810 1.266
XD 9/40/357........... 0.821 1.275
Walther PPQ M2 9mm 0.832 1.254
S&W M&P 9/40/357... 0.859 1.268
Beretta PX4........... 0.865 1.259
Sig P229 40/357...... 0.862 1.263
P229-1 E2 9mm......... 0.862 1.263
Sig P320 9/40/357... 0.870 1.268
Glock 9/40/357....... 0.890 1.310
Sig P320 45ACP...... 0.920 1.382

Thanks, folks!

This definitely helps.

My M&P 9mm and P320 9mm magazines use the same Kydex mag holders, with just a slight adjustment of the tension screw.

After screwing-around for over a month trying to find what I regarded to be a suitable Kydex double mag pouch for my P320F .45 ACP I took members ACClauhs' and Sunset_Va's suggestions and gave this a try:



Blue Force Gear Double Pistol Belt Pouch

Works like a champ! So well, in fact, that even if somebody finally did come up with just what I thought I wanted in a Kydex double mag pouch, I might not even bother.

Amazon product page: Blue Force Gear Belt Mounted Ten-Speed Pistol Magazine Pouch with Adjustable Belt Loop. Note the product has a 5-star rating out of 21 reviews.