May 10, 2017, 12:42 PM
rocky47Sig P229 Help
Im about to pick up a used 229 in .40 cal., what do i need to get to convert it to .357 sig
The only love that money can buy is a dog
May 10, 2017, 12:46 PM
sigfreundA barrel chambered for 357 SIG.
► 6.4/93.6
“Wise men talk because they have something to say; fools, because they have to say something.”
— Plato May 10, 2017, 12:59 PM
sig78257I believe the .40 ships with a number six front sight and the .357 a number eight (not positive, don't think it makes much difference at fairly close distances. I converted my 229 .40 Legion to .357 with just the barrel which dropped in.
May 10, 2017, 01:12 PM
stoic-oneThe difference in sights between the .40 and the .357 theoretically results in a 2" difference in POI at
25 yards which you may or may not notice. Other than that, all you should really need to change is barrels.
I would also note that when I buy used, I usually get a parts kit and re-spring the gun since I have no way of knowing the previous round count or maintenance.
http://www.topgunsupply.com/si...0-357-parts-kit.htmlMay 10, 2017, 01:26 PM
TheFrontRangeAvail thyself of a pile of .357 SIG ammo if you have not already - .357 and a P229 is a wonderful combination.
"The sea was angry that day, my friends - like an old man trying to send back soup in a deli." - George Costanza
______________________
An expert is one who knows more and more about less and less until he knows absolutely everything about nothing. --Nicholas Murray Butler
May 16, 2017, 10:24 PM
Deputy 617Just ran my P229 in 357 SIG today as a matter of fact. Some of the guys I work with didn't much care for the DAK trigger, but I find it to be excellent. All it took for mine was a barrel swap. Everyone who shoots it comments about how accurate it is regardless of whether they like the trigger. I love my P229 DAK 357. It actually is better on my arthritic hands than my issued P220 .45 ACP.
SIG SAUER...... Get you some!
June 12, 2018, 09:15 PM
inspector710To those of you who dropped in a 357 barrel in a P229, where did you get them? Is it the same barrel in a M11A1? Thanks.
June 12, 2018, 11:05 PM
BuddyChrystThe answer to most any SIG part question is topgunsupply (TGS).
https://www.topgunsupply.com/s...-barrel-357-sig.html The M11-A1 is a P229, but it's only 9mm. To do 9mm in a .40/.357, you have to buy a BarSto conversion 9mm barrel. SIG factory won't work. Even then, I personally wouldn't use it outside of the range if converted to 9mm.
------------------------------------------------
Charter member of the vast, right-wing conspiracy
June 13, 2018, 09:32 AM
AVGI just received a Sig .357 barrel for $ 155.00 from here
https://grabagun.com/checkout/cart/June 13, 2018, 12:57 PM
LtJLdid it years ago. Got my barrel from Sig. never had any issues, other than slowly causing me to go deaf.