SIGforum
Picked up a Beretta 92fs for a project gun.
May 09, 2018, 06:17 PM
1KPerDayPicked up a Beretta 92fs for a project gun.
very cool.
straight dust cover 92s are the sexiest IMO.
---------------------------
My hovercraft is full of eels.
May 09, 2018, 07:08 PM
scsigsquote:
Originally posted by 1KPerDay:
very cool.
straight dust cover 92s are the sexiest IMO.
I am with you on that
May 09, 2018, 07:20 PM
SevenPlusOneI think I've had 7 92s, I still have four, and still look at them on gunbroker and at the gunshops/gunshows.
My original 92FS, and first gun, that I've had for 25 years, is still going strong.
"Ninja kick the damn rabbit" May 10, 2018, 12:03 PM
RHINOWSOYeah, I folded and bought the Langdon trigger job in a bag.
I haven't bought a firearm in a year, so I guess I was due to break out a bit with the 92A1 and accessories.
Looking forward to getting it to the range to shoot it, then fixing it up a bit.
May 11, 2018, 01:04 PM
scsigsWC extended mag release came in, having a hard time installing it.
I have replaced mag release several times before on Betettas with no issues but this one is just not working with me.
May 11, 2018, 01:31 PM
ScubaCatThat's odd. Im 5'8" and on a scale of 1-10 with 1 being barbie doll hands and 10 being bear paws, Im about a "5"...I grip a 9x series with zero issues at all. Do you have particularly stubby fingers?
quote:
Originally posted by Mauser96:
I always wanted a Beretta 92 but have never owned one. I never thought I had small hands, but I just can't get comfortable with the long trigger reach. I have passed up great deals just because the gun didn't fit me.
May 12, 2018, 08:46 PM
pedropcolaWell having 92’s with and without the grip relief cut it makes a huge difference.
May 12, 2018, 09:39 PM
DMFquote:
Originally posted by jljones:
Take a look at Ernie Langdon's "Trigger kit in a bag". It is solid stuff, and he is the master of the Beretta. A lot of the stuff you see at Wilson came directly from his experience with hundreds of thousands of rounds through Berettas over the years.
He is a solid guy, and a great instructor.
https://www.langdontactical.co...retta_92_Series.htmlYou do the math, and you can't outsource buying the stuff from Wilson and come out much cheaper, plus his stuff is pre-stoned on all the contact surfaces that matter.
I would also advocate spending the $55 and convert the gun from FS to G, but that is my preference only.
+1!
___________________________________________
"He was never hindered by any dogma, except the Constitution." - Ty Ross speaking of his grandfather General Barry Goldwater
"War is the remedy that our enemies have chosen, and I say let us give them all they want." - William Tecumseh Sherman
May 13, 2018, 07:37 AM
scsigsInstalled the WC mag release, Beretta metal trigger, conversion return spring(not sure I like it) 13# hammer spring and a WC guide rod.
Shot about 150 at my range with no issues, my only concern was light strikes with the 13# hammer spring. All 150rds were tulammo so I think it should be good to go. Trigger pull was a excellent, very happy.
Next on the list is a set of thin grips and possibly refinishing the slide in silver/gray.
May 13, 2018, 08:19 AM
smschulzAll I've ever needed is the "D" spring, Wolfe self-contained trigger spring and the Elite hammer to make them sing a precision tune.
Pretty close to the Langdon upgrade with only the necessary parts at a LOT less $$.
May 14, 2018, 01:10 PM
fatmanspencerWhat is the difference on these trigger jobs? I already feel the trigger is short on my 92fs, though I do not know the year. 92fs are like a 1911, they are classic and worked the first, and final time. Did they have a different trigger on newer models? Or is this like the difference between a Legion 226 and a regular 226? I.E. only comp shooters will really notice.
Used guns deserve a home too
May 14, 2018, 01:47 PM
Snake207^^^
The Langdon Trigger Job in a Bag really doesn't do much with the trigger, per se.
(Well, the WC trigger bag does decrease overtravel.)
His kit has the Wilson Trigger bar, Elite II hammer, sear, sear spring, trigger spring, hammer strut and a hammer spring in your choice of weight.
The trigger bar, sear, and hammer strut has already been polished and stoned by Ernie, which is what you can't get if you went with Wilson Combat parts alone.
Even with a factory 20lb mainspring, you can tell the difference in the smoothness. Once you start going down in spring weight, the kit REALLY shines. 12lb is about as low as I'm going for my competition gun, and I'd put the feel of the kit on par with most custom guns. Like I said before, it's easily 95% of a gunsmith would do, that you can do at your table.
May 14, 2018, 03:36 PM
scsigsquote:
Originally posted by fatmanspencer:
What is the difference on these trigger jobs? I already feel the trigger is short on my 92fs, though I do not know the year. 92fs are like a 1911, they are classic and worked the first, and final time. Did they have a different trigger on newer models? Or is this like the difference between a Legion 226 and a regular 226? I.E. only comp shooters will really notice.
The setup with reduced power trigger return spring and the 13# hammer spring will bring down trigger pull to about 4-4.5/8-9lb
My beretta had a plastic trigger, the metal trigger from beretta USA is $20, don't really know if the metal trigger actually makes a big difference but for $20 why not.
May 15, 2018, 09:43 AM
fatmanspencerI believe mine is a metal trigger, which brings me to wonder how old my new beretta was. IS the plastic a new or old thing? My quick google fu is that since about 02 theyve been plastic, but I'm pretty sure mine is a usa made metal one.
Used guns deserve a home too
May 15, 2018, 08:26 PM
henryarnaudquote:
Originally posted by fatmanspencer:
I believe mine is a metal trigger, which brings me to wonder how old my new beretta was. IS the plastic a new or old thing? My quick google fu is that since about 02 theyve been plastic, but I'm pretty sure mine is a usa made metal one.
You could always use Beretta's serial number lookup to get an approximate year of manufacture.
http://www.berettasupport.com/...atics_search_new.htm
"It is a capital mistake to theorize before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts." Sherlock Holmes May 15, 2018, 10:16 PM
piedrarcThe Wilson trigger bar increases the hammer arc in DA, hence you can get reliable ignition on the #12 hammer spring because the hammer is coming back further.
If you are placing the #12/#13 in a standard 92 with a stock trigger bar you'll most likely see light primer strikes more often. The hammer in DA just doesn't move far enough back before dropping.
You really owe it to yourself to avoid the possibility of error if you aren't familiar with these parts to purchase one of LTT's triggers in a bag. E. Langdon is absolutely top notch!
May 16, 2018, 12:34 PM
PhotomanI've run the 13# Wolff hammer spring in all my 92's for years with 100% reliable ignition with many different brands of quality ammo. I don't shoot the steel case stuff and don't reload 9mm so can't offer any input there.
+++
May 16, 2018, 01:45 PM
scsigsquote:
Originally posted by Photoman:
I've run the 13# Wolff hammer spring in all my 92's for years with 100% reliable ignition with many different brands of quality ammo. I don't shoot the steel case stuff and don't reload 9mm so can't offer any input there.
I shot 150rds of steel cased ammo with 13# with 0 issues.
May 19, 2018, 12:56 PM
RHINOWSOPicked up my Italian 92A1 today. I'm looking forward to shooting it stock tomorrow, before diving into some modifications. G-conversion kit, LTT Trigger job in a bag, and some other things.
May 20, 2018, 02:40 PM
RHINOWSOShot my 92A1 this morning, just 100 x Fiocchi 115 FMJs and 20 Tula. Ran as you'd expect and was accurate.
With it being a proven good weapon, I proceeded to drop the Beretta G-kit in, along with Langdon's Trigger Job in bag, plus a steel trigger and magazine release assembly. I still want a metal guide rod and some LTT grips, but those are easy installs.
While dry firing the Langdon trigger job is AMAZING, especially for a drop in kit. I went with the 14# hammer spring and it's a great combination - I know I might be able to go lower with that but after having a bad experience with a SIG & lower power hammer springs, I always err on the high side.
The sights (came with non-night sight 3 dots) are adequate but it would certainly benefit from some Trijicon HDs or something similar.
Gripping it is a little different, as I've been shooting Glocks nearly 100% of the time for the past 3 years. My support hand thumb is having a hard time getting comfortable but I'll figure it out.