SIGforum
The P228 - facts, factoids, and opinions ((**Updated** - P226C (aka, PROTO-1) info incorporated into OP))

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/430601935/m/3810077763

October 20, 2019, 04:02 PM
EasyFire
The P228 - facts, factoids, and opinions ((**Updated** - P226C (aka, PROTO-1) info incorporated into OP))
I get the same warm feeling handling the P365 as I do on the P228. Not getting rid of either.


EasyFire [AT] zianet.com
----------------------------------
NRA Certified Pistol Instructor
Colorado Concealed Handgun Permit Instructor
Nationwide Agent for >
US LawShield > https://www.texaslawshield.com...p.php?promo=ondemand
CCW Safe > www.ccwsafe.com/CCHPI
November 06, 2019, 02:58 PM
dpast32
Hello Gents, As I looked over the updated P228 Serial # List here, I noted that there doesn't appear to any examples from the number range of between # B140XXX - B149XXX.

Is the lack of any numbers within this particular range due to anything specific, or is it just because no examples within this range have been reported ? My P228 [KB] is # B1460XX, so I was naturally curious about the lack of examples ? As always, any & all replies will be very much appreciated. THANKS

Best, dpast32
November 06, 2019, 04:17 PM
12131
quote:
Originally posted by dpast32:
Hello Gents, As I looked over the updated P228 Serial # List here, I noted that there doesn't appear to any examples from the number range of between # B140XXX - B149XXX.

Is the lack of any numbers within this particular range due to anything specific, or is it just because no examples within this range have been reported ? My P228 [KB] is # B1460XX, so I was naturally curious about the lack of examples ? As always, any & all replies will be very much appreciated. THANKS

Best, dpast32

Check the extended P228 list in this thread. There are a few in there.

https://sigforum.com/eve/forums...0601935/m/1130042554

-B140-855-KB-1991
-B140-994-KB-1991-Factory TTNi / Slide & barrel refinished in CPII
-B149-615-KB-1991 = Thanks to hapevo


Q






November 07, 2019, 09:34 AM
dpast32
I THANK YOU very much for your kind reply. I didn't think it was due to anything worthy of note, but you never know unless you look into it. Take care,

Best, dpast32
November 10, 2019, 08:49 AM
Amurr
Is there any consensus on what is best years for the W German P228? For example would you prefer a 1989 or a 1995?
November 10, 2019, 08:59 AM
12131
quote:
Originally posted by Amurr:
Is there any consensus on what is best years for the W German P228? For example would you prefer a 1989 or a 1995?

Unlike the P220, where many P220 aficionados tend to say that the latter years are the best, due to frame reinforcement, the P228 had no such revision. So, I'd say the '89 P228 is just the same as the '95 in quality. Many P228 fans/collectors like the '89 for historical reason, however - First year commercial sale, red cardboard box, true West German gun before the wall fell.


Q






November 10, 2019, 09:19 AM
Ed Fowler
Like all Sig's, if they are stamped West Germany, I will probably like it. West German sigs had great triggers and just a little more finish work. Kind of like they really cared!
November 10, 2019, 10:42 AM
vincent317
dpast32 - I have a P228 KB serial B1493XX
November 10, 2019, 01:02 PM
dpast32
THANKS Vince, I appreciate the input. I had inquired only because I didn't observe any #'s that were relatively close to my example, which is # B1468XX / KB. I purchased it 2nd hand, as it was previously owned by a guy from another Dept. As I do with all my Sig's, I went to a Sig Factory 'Short Trigger', & haven't had to do anything else to it since then. At the time I picked the 228 up, I had been using one of my all time favorite Sigs, the P225. I had initially bough the 225, for Range carry, as I had been chosen as the Dept. Armorer & we were planning to transition to Sig's from S&W M64 Revolvers. However, in the end I decided to keep the P228 & part with my beloved P225, but, that's a whole another for as they say.

Best, dpast32
November 10, 2019, 06:02 PM
Dakor
Every time I see this thread, I wish Sig would make the Proto-1 (aka P226 Compact) a reality. If the biggest P228 aficionado on Sigforum says that pistol is what the P228 should have been, do you think Sig would wake up?
Nope!
December 26, 2019, 02:25 AM
compton
Thanks for the post 12131! I would love to see all the previous photos, would it be possible to replace the broken photobucket links to a new host e.g. imgur


I am an owner of a P228 with B serial # only marked on frame above trigger-- no proof marks. Sorry if this is a stupid question, just wanted clarification, does this mean that the parts were manufactured in Germany but assembly was done in US? My test rounds are signed and dated 02/19/2003


They may forget what you said, but they will never forget how you made them feel.
December 26, 2019, 03:21 AM
12131
quote:
Originally posted by compton:
Thanks for the post 12131! I would love to see all the previous photos, would it be possible to replace the broken photobucket links to a new host e.g. imgur

PB is still working on the major crash they experienced over a week ago at their primary data center. So, I'm waiting and hoping they didn't lose all the pics, although they claim that all the pics are safe.
quote:
I am an owner of a P228 with B serial # only marked on frame above trigger-- no proof marks. Sorry if this is a stupid question, just wanted clarification, does this mean that the parts were manufactured in Germany but assembly was done in US? My test rounds are signed and dated 02/19/2003

Yes, your P228 was assembled here at SIG NH. Hence, only single serial number (on frame) and no proof marks. Frame and slide are German made. If the barrel has "DE" on the left side of the barrel hood, it's German. If it has the "P" marked on the locking lug, then it's US made.


Q






December 26, 2019, 11:13 PM
compton
Epic PB, i'm sure they had an off-site backup of some sorts.

Thanks for clearing that up, mister p228 guru!


They may forget what you said, but they will never forget how you made them feel.
February 28, 2020, 12:55 PM
cgff
Just picked up a KG date code 228
Ser# B262 xxx has the serial # on slide,barrel and frame with proofs on slide and frame?
February 28, 2020, 03:32 PM
wgsigs
Hooray! The photos are back. How long ago did that happen?

Edit: Can't spell.

This message has been edited. Last edited by: wgsigs,
February 28, 2020, 06:01 PM
12131
quote:
Originally posted by wgsigs:
Hurray! The photos are back. How long ago did that happen?

PB crashed on Dec 18th and didn't become fully operational until Jan 29th. Roll Eyes


Q






July 26, 2020, 09:28 AM
wgsigs
Thank you very much for this P228 thread. I really came to appreciate it from a recent experience.

I was in a P228 discussion on another gun forum when a poster mentioned he knew a friend of a friend (yeah, I know Wink) who was a designer for SIG back when the P228 was being developed. That guy had a test prototype made from a chopped P226.

I thought I remembered a discussion here about a similar gun and a debate as to whether the gun was a fake and if the guy was a scammer because he was trying to sell the pistol. I couldn't remember what the resolution was so I looked here and lo and behold there was the prototype at the bottom of your first post. Obviously the prototype was real or you would not have bought it.

Thanks again, Q.
December 18, 2020, 09:10 PM
coloradohunter44
Bump



"Someday I hope to be half the man my bird-dog thinks I am."

FBLM LGB!
December 18, 2020, 11:46 PM
njauto
You know Larry Vickers just released a Sig Sauer coffee table book. I have not looked at it but I assume your 228 Proto 1 is not in there. I’m thinking that is a major piece of Sig history and he probably would have if he knew about it.
December 20, 2020, 11:48 AM
SIGWALLY
Why isn't this fantastic and informative thread a sticky?