I have a G23, w/extended G22 mags for EDC. I am becoming old and arthritic and want to move to a 9mm platform. Optons: 1. Sell G23, buy G19. Painfully slow and maybe costly. 2. Buy complete G19 slide. G23 ejector an issue? 3. Buy G19 barrel, Replace 9mm extractor, 9mm ejector, and 9mm FCU?
SF opinions? Thank you all.
A gun in the hand is worth more than ten policemen on the phone. The American Revolution was carried out by a group of gun toting religious zealots.
February 11, 2018, 01:12 PM
Rob Decker
Buy a 19, sell the 23.
Glocks are not that expensive. Frankenguns can wind up being expensive.
---------------------------------------- Death smiles at us all. Be sure you smile back.
February 11, 2018, 01:13 PM
P220 Smudge
quote:
Originally posted by Rob Decker: Buy a 19, sell the 23.
Glocks are not that expensive. Frankenguns can wind up being expensive.
This. I looked into converting a G22 RTF2 over to 9mm a few years ago and the math just didn't work out.
______________________________________________ Carthago delenda est
February 11, 2018, 01:14 PM
RHINOWSO
quote:
Originally posted by Rob Decker: Buy a 19, sell the 23.
Glocks are not that expensive. Frankenguns can wind up being expensive.
This in spades
February 11, 2018, 01:21 PM
George43
Thanks to all of you. I may just keep the 23 after I buy the 19.
A gun in the hand is worth more than ten policemen on the phone. The American Revolution was carried out by a group of gun toting religious zealots.
February 11, 2018, 01:25 PM
MNSIG
I've been hanging on to a few Glocks simply because the Gen 3s are worth so little on the used market. For a couple hundred bucks, they are perfectly fine as a spare, a "garage gun" to stash, etc.
February 11, 2018, 01:32 PM
12131
I have a FrankenG19 (G19 upper on G23 frame), but only because it was already made, when I bought it. It's a fine gun.
Q
February 11, 2018, 01:39 PM
1KPerDay
Hundredish bucks for a 40/9 conversion barrel. Mags will probably work, extractor and ejector will probably work. If not sell the barrel and get a $300 trade in G19.
--------------------------- My hovercraft is full of eels.
February 11, 2018, 02:20 PM
P220 Smudge
George, if you're not hankering after a Gen 5, or 19x, I'm willing to bet you can find a nice used Gen 3 or Gen 4 for a very reasonable price, likely local. I've been seeing Gen 4's pop up here in the classifieds for prices that are seeing them get snagged in the first post or two. Maybe post a WTB?
quote:
Originally posted by 12131: I have a FrankenG19 (G19 upper on G23 frame), but only because it was already made, when I bought it. It's a fine gun.
Man, I hate seeing a Gen 2 frame worked over.
No slight to you, of course. Just one of those things.
______________________________________________ Carthago delenda est
February 11, 2018, 05:39 PM
hrcjon
Me I'd slap a G19 slide on it and go. I do this all the time. In terms of money/value it depends on what you find for pricing for the slide versus a full gun.
“So in war, the way is to avoid what is strong, and strike at what is weak.”
February 11, 2018, 05:56 PM
gearhounds
I have a 19, and a Nickel boron slide assembly in .40. No changes need to be made save the mag to shoot either caliber. Do a search on broker for Glock 19 parts- sometimes parts kits from destroyed guns show up for a steal.
“Remember to get vaccinated or a vaccinated person might get sick from a virus they got vaccinated against because you’re not vaccinated.” - author unknown
February 11, 2018, 06:51 PM
ArLEOret
I have several G-23s as well as G-19s. I bought a used 40 to 9 conversion barrel for the G-23, KKM, and installed it. Shoots as good and is accurate. The conversion barrel in a bit heavier than the OEM and doesn't have the flip that the 19 does it seams. I use 19 mags but that's all.
Officers lives matter!
February 11, 2018, 07:04 PM
12131
quote:
Originally posted by P220 Smudge:
quote:
Originally posted by 12131: I have a FrankenG19 (G19 upper on G23 frame), but only because it was already made, when I bought it. It's a fine gun.
Man, I hate seeing a Gen 2 frame worked over.
No slight to you, of course. Just one of those things.
The stippling was my doing (well someone local did it for me). To me, a Glock is a Glock, be it Gen 1 or Gen 10. It has no special significance to me.This message has been edited. Last edited by: 12131,
Q
February 11, 2018, 07:51 PM
1KPerDay
quote:
Originally posted by P220 Smudge:
Man, I hate seeing a Gen 2 frame worked over.
No slight to you, of course. Just one of those things.
Is it a Gen 2? I see three pins. Do the Gen 2s have 3 pins but no rail?
--------------------------- My hovercraft is full of eels.
February 11, 2018, 08:11 PM
Warhorse
quote:
Originally posted by George43: Thanks to all of you. I may just keep the 23 after I buy the 19.
So far that's what I'm doing. A G23 is not worth much these days.
____________________________ NRA Life Member, Annual Member GOA, MGO Annual Member
February 11, 2018, 08:11 PM
12131
quote:
Originally posted by 1KPerDay:
quote:
Originally posted by P220 Smudge:
Man, I hate seeing a Gen 2 frame worked over.
No slight to you, of course. Just one of those things.
Is it a Gen 2? I see three pins. Do the Gen 2s have 3 pins but no rail?
It's a Gen 2.
Q
February 11, 2018, 09:03 PM
creedbratton2
Buy a 19, Ive seen police trade ins on several sights under 400 with night sights. keep the 23 to throw in the car/truck.
February 12, 2018, 03:49 AM
911Boss
Lone Wolf conversion barrel, 9mm magazines.
Was flawless in my G23 and probably the lowest cost/easiest way to do it.
What part of "...Shall not be infringed" don't you understand???
February 12, 2018, 05:49 AM
Badhammer
Another vote for a Lone Wolf conversion barrel. I've been running one for years in my G35. Didn't change anything else though I do us G17 mags.
February 12, 2018, 06:12 AM
Bulldog7972
quote:
Originally posted by 911Boss: Lone Wolf conversion barrel, 9mm magazines.
Was flawless in my G23 and probably the lowest cost/easiest way to do it.
I did the same thing and have never had a single malfunction but I'm afraid to EDC it because everyone tells me I will have malfunctions.
