August 11, 2017, 11:30 PM
txscoutWTK: P225 Barrel identification/information
I have a stainless oversized/extended length barrel for a 225 that I found in my "stash of stuff", that I had bought some time ago. I was wondering if someone could help me ID it or has any further information.
It is marked "9x19 NM 225"
Thanks in advance!
August 11, 2017, 11:43 PM
SigSentryLooks like an EFK barrel
http://www.efkfiredragon.com/sig-sauer2.htmlAugust 12, 2017, 12:32 AM
12131quote:
That's a P225-A1, not the original P225. The barrel in the OP is for the P225.
August 12, 2017, 02:03 AM
12131quote:
Originally posted by txscout:
I have a stainless oversized/extended length barrel for a 225 that I found in my "stash of stuff", that I had bought some time ago. I was wondering if someone could help me ID it or has any further information.
It is marked "9x19 NM 225"
Thanks in advance!
I wonder if the barrel was intended for the Canadian market, as Canadian law requires a pistol barrel length of more than 105 mm (that's just a hair over 4 inches). And, the standard P225/P6 barrel length is 3.86 inches. A stock P225 is a prohibited firearm in Canada.
August 12, 2017, 09:49 AM
txscoutIt's possible it could be an EFK variant, because of similar markings, but it would have to be a custom fit.
I don't think so about the Canadian market. It seems the OD of this barrel is purposely oversized, for custom fitting--it won't fit thru the end of the slide without turning it down on a lathe.
I'll have to measure it and get the OD and overall length. I'll post it later when I get home.
Thanks for the replies.