SIGforum
SIG Sauer AXG

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/430601935/m/1290046374

October 14, 2020, 11:15 PM
Fenris
SIG Sauer AXG
You can't go to Hell and Back with a plastic gun. It'll melt.




The budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed lest Rome become bankrupt. People again must learn to work, instead of living on public assistance. ~ Cicero 55 BC

The Dhimocrats love America like ticks love a hound.
October 14, 2020, 11:31 PM
sns3guppy
That's a myth. I've been there. Everything is plastic and says "Made in China."
October 15, 2020, 12:36 AM
monoblok
I think to some a poly gun IS hell. Wink


-MG
October 15, 2020, 06:30 PM
neex
But, but, it's striker-fired.
October 15, 2020, 08:32 PM
air
What if the frame is MIM'd?!


___________
___________
___________
October 15, 2020, 08:36 PM
sns3guppy
quote:
Originally posted by air:
What if the frame is MIM'd?!


What if it is? There is nothing wrong with metal injection molding. Most who decry it don't even know what it is.

It's a process used on a lot of transonic and supersonic aircraft today, let alone successfully on a number of firearms and numerous other parts in everything from appliances to medical equipment.
October 16, 2020, 03:10 AM
bushmonkey9
have a small issue with the new frame, why couldn't they raise the beavertail higher, it wouldn't affect the slide, the FCU, nor function. while making it more handleable.


sig nut', haulin' 3 sig 228's
October 16, 2020, 07:45 AM
air
quote:
Originally posted by sns3guppy:
quote:
Originally posted by air:
What if the frame is MIM'd?!


What if it is? There is nothing wrong with metal injection molding. Most who decry it don't even know what it is.

It's a process used on a lot of transonic and supersonic aircraft today, let alone successfully on a number of firearms and numerous other parts in everything from appliances to medical equipment.


I agree, as an aircraft mechanic, I've yet to see anything MIM'd or SLS'd be the cause of an issue.


___________
___________
___________
October 18, 2020, 08:17 AM
ziggy308
quote:
Originally posted by DirectDrive:
Make mine Full Size, stainless and black.
me to.


need to post picks for item up for sale
October 18, 2020, 08:32 AM
12131
quote:
Originally posted by bushmonkey9:
have a small issue with the new frame, why couldn't they raise the beavertail higher, it wouldn't affect the slide, the FCU, nor function. while making it more handleable.

I take it you have shot the gun to comment on the "issue"?


Q






October 18, 2020, 08:35 AM
ziggy308
Since the rails would be on the trigger module no more damage aluminum frames like the 226 i had that the side would wear down the frame to aluminum in spots on the frame. Look forward to the black one.


need to post picks for item up for sale
October 21, 2020, 02:28 PM
mbinky
quote:
Originally posted by DirectDrive:
This one here looks like it has a Professional Series slide on it.
The best P320 slide IMO.
Solves the past mistakes.


I just noticed that this has a separate rear sight, not one integrated to the optic plate. Is this what's meant by "professional series slide"? I much prefer this setup.
October 21, 2020, 02:37 PM
dking271
quote:
I just noticed that this has a separate rear sight, not one integrated to the optic plate. Is this what's meant by "professional series slide"? I much prefer this setup.


That is exactly correct.


_________________________
"An appeaser is one who feeds a crocodile - hoping it will eat him last” - Winston Churchil