Want to buy 500 rnds 10mm factory ammo. Ammoman. and Natchez always out ...

Several local 10mm guys swear by this ammo> http://www.doubletapammo.com/php/catalog/index.php

Never looked for this ammo, so I don't know if any dealers carry it.

Thanks, that helps, but was looking for shooting ammo. Blazer, Rem, Fed Etc...

I have been on the same mission for a couple of months. Cabelas is the only source I can find other than Double Tap and Buffalo Bore. They have had Winchester Silvertips and Blazer on the shelf. Good luck.

Well I have been on a bit of a mission for member Tim335. I stopped by the factory of Georgia Arms and Ammo a month or so ago. I asked the same question and they said they were all out. He did go back and double check, they are only out of the powder they use to load 10MM, the projectiles they use of 10MM and the brass. So I take it they have the large pistol primers and that's about it. If I find some I will post it, but good luck.

quote:

Originally posted by steelman:
Thanks, that helps, but was looking for shooting ammo. Blazer, Rem, Fed Etc...

All of that ammo there is just "FBI Lite" 10mm loads. I say if you're going that route, get a 40 barrel for your gun and plink with 40. You'll probably pay for the barrel in no time with the cost savings.

DoubleTap ammo is the real deal. 10mm as it was meant to be.

DOuble Tap for high end loads or GA for practice ammo. The 10mm is where reloading really pays the bills. You can reload full power 10mm for a little more than 9mm.

quote:

Originally posted by sigcrazy7:

quote:

Originally posted by steelman:
Thanks, that helps, but was looking for shooting ammo. Blazer, Rem, Fed Etc...

All of that ammo there is just "FBI Lite" 10mm loads. I say if you're going that route, get a 40 barrel for your gun and plink with 40. You'll probably pay for the barrel in no time with the cost savings.

DoubleTap ammo is the real deal. 10mm as it was meant to be.

I would do that in a heart beat, but unfortunatly , I do not know of anyone that makes a .40 barrel for my fav Delta Elite....but thanks for the help...

10mm is hard to find these days. All you can do is try GB, AA, and the various online sellers like Cheaper Than Dirt, Natchez, Midway, etc. Good luck.

quote:

Originally posted by steelman:

quote:

Originally posted by sigcrazy7:

quote:

Originally posted by steelman:
Thanks, that helps, but was looking for shooting ammo. Blazer, Rem, Fed Etc...

All of that ammo there is just "FBI Lite" 10mm loads. I say if you're going that route, get a 40 barrel for your gun and plink with 40. You'll probably pay for the barrel in no time with the cost savings.

DoubleTap ammo is the real deal. 10mm as it was meant to be.

I would do that in a heart beat, but unfortunatly , I do not know of anyone that makes a .40 barrel for my fav Delta Elite....but thanks for the help...

Actually, several makers are out there:
http://www.barsto.com/category_main.cfm?ID=GV&cco=24
http://www.stormlakebarrel.com/barrels
I have a Barsto in 357sig for my Delta, great barrels.

Thanks for the barrel info,,, that would be great, to have a D.E. in .40

I don't know why but I can always find Blazer 10mm at my local Academy store. It is the 200 grain bullet. Usually around $20 a box of 50.

steelman,

I buy 180gr FMJ from Georgia Arms 1000 rounds at a time (in a handy-dandy ammo can - they do also sell it by 500s). Unfortunately, right now all they have is 165gr and orders don't ship for a month or more.

While Georgia Arms does make some "remanufactured" or reloaded ammo, their 10mm "Canned Heat" bulk ammo is made from all new components.