SIGforum.com    Main Page  Hop To Forum Categories  Suppressed Weapons    SRD9 Piston threading depth
Go
New
Find
Notify
Tools
Reply
  
SRD9 Piston threading depth Login/Join 
Member
posted
HI, All Picked up my SRD9 can and I wanting to install it on my Kalashnikov KP-9 SBR

Issue I think will be fine but need to be sure, 1/28 Piston the threading bottoms out at .500" threading on my barrel is about .620" in length. So Piston bottoms out.

Will that Work?

 
Posts: 5 | Registered: June 01, 2009Reply With QuoteReport This Post
I run trains!
Picture of SigM4
posted Hide Post
Should be fine (make sure to keep it screwed on tight) but a fixed mount might be a better option if you can find one.



Success always occurs in private, and failure in full view.

Complacency sucks…
 
Posts: 5423 | Location: Wichita, KS (for now)…always a Texan… | Registered: April 14, 2006Reply With QuoteReport This Post
Hoping for better pharmaceuticals
Picture of AZSigs
posted Hide Post
Put the piston back in the can and screw the can on. I think you may see less of a problem.




Getting shot is no achievement. Hitting your enemy is. NRA Endowment Member . NRA instructor
 
Posts: 8752 | Location: Peoria, Arizona | Registered: April 02, 2007Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by AZSigs:
Put the piston back in the can and screw the can on. I think you may see less of a problem.


I don't think so, piston can only go on so far.


I am thinking a small spacer would be the Idea to be safe I only need 1/8" thick, all are 1/4" which might not leave enough threads to attach safely.



Does look nice on my P226 SAO I got
 
Posts: 5 | Registered: June 01, 2009Reply With QuoteReport This Post
Member
Picture of George from Alaska
posted Hide Post
I would call the shop engineers at Sig.


P220 European
P220 Scorpion
P220 10mm Legion
MK25
P226 Legion
P226 SAO Legion
P229 Legion
556 rifle, my favorite 556
P320 M17 (not the expensive
one) with Leupold DPP
P227 Tac-ops
machineguns
suppressors
07/02
 
Posts: 76 | Registered: August 04, 2019Reply With QuoteReport This Post
Member
Picture of SIGfourme
posted Hide Post
You are replacing the spring with a fixed barrel spacer?
As M4 said-shouldn’t be a problem.
 
Posts: 2295 | Location: Southeast CT | Registered: January 18, 2009Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by SIGfourme:
You are replacing the spring with a fixed barrel spacer?
As M4 said-shouldn’t be a problem.


Fixed spacer is in it.

OK

Thanks for the Answers
 
Posts: 5 | Registered: June 01, 2009Reply With QuoteReport This Post
I run trains!
Picture of SigM4
posted Hide Post
In this case you’re indexing off the end of the muzzle rather than the shoulder of the threads.



Success always occurs in private, and failure in full view.

Complacency sucks…
 
Posts: 5423 | Location: Wichita, KS (for now)…always a Texan… | Registered: April 14, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Suppressed Weapons    SRD9 Piston threading depth

© SIGforum 2024