**UPDATE**

New Medium and Fat Triggers available for both the P6/P225 and the 220/245 8mm wide triggers.

Pictures of the fat trigger to come soon.

Here is a short, med and stock trigger next to each other for comparison. So if you dont like the stock airsoft trigger and done need a short trigger. Take a look at the medium and fat triggers !!



So here is your chance to finally get a short trigger that no one else is offering. This is not a modified stock 239 trigger, this is a brand new CNC machined trigger.

The P6 trigger is a little flatter and wider then a stock trigger , offering a better grip surface for you finger.

I am offering them in Black Oxide and Plated.

The Black Oxide triggers run $55 .
Nickel plated steel triggers run $65 .

Sig P6/P225 Parts Page



I have P6 and P220 Triggers in stock in both Short , Medium and Fat configurations.

Here are a few of the P6 pictures. The short trigger is reduced about .220 , or roughly 1/4". Substantially changing the finger placement for those with smaller hands you ll find this to be a great help in reaching the trigger. For those with gloves in winter time, you ll enjoy the extra room for your glove finger.

For the Old school 220 trigger, its basically the same trigger setup available in both normal pull and short trigger configurations. These are smooth face, no ribs and again a little flatter wider then the stock 220 trigger offering better finger placement.

Customized Creationz P6 225 Short Trigger Installtion Video


Here is stock trigger P6 Application


Here is the aluminum P6 Short Trigger version.



Again stock P6



Here is the aluminum P6 Short Trigger version.



Black Chrome Short Trigger ( $65 )


Please email with any questions

Thanks
Todd

guns@customizedcreationz.com

This message has been edited. Last edited by: customizedcreationz,

Awesome! I like the P6 short trigger. So you have the short triggers in stock?

Yes they are in stock. I ve had a couple patient people waiting for them. And I appreciate the patience, and THEy ARE HERE FINALLY !!!!

I have already shipped a few out and have about 20 made for the P6 and about 5 for the 220.

Thanks
Todd

This message has been edited. Last edited by: customizedcreationz,

do you have any short triggers that are blued or not shiny?

They look great. Good luck with your sales.

Hey Todd,

Let me know when you get a Short Trigger for a P250. SIG Still doesn't know when they will have them to buy!

quote:

Originally posted by stickman428:
do you have any short triggers that are blued or not shiny?

Yes I can blue the steel ones, not the aluminum ones.

I should state I offer them , black oxide, blue , polished or plated in the steel versions.

Thanks everyone for the kind words.

Dave ,
I might be able to do a 250 short trigger. I would have to see one again , I thought they were similiar to Sig Pro triggers arent they ?

Thanks
Todd

I'm not sure if they are the same or not. Does anyone up in Mich. have one Todd can look at?

I am pretty sure they are similar, I believe they don't interchange. But I think they are similar design.

Email me a picture if you can , maybe we can work something out. I know it wont be quite as easy as the standard trigger is. But anything can be done.

I should buy one of the 250's just to have it anyways...

Thanks
Todd

This message has been edited. Last edited by: customizedcreationz,

I'm not sure how to remove the trigger or I'd just send it to you to use to prototype.

quote:

Originally posted by Rolan_Kraps:
I'm not sure how to remove the trigger or I'd just send it to you to use to prototype.

Ask DMD45 , I did his trigger polishing and quite a few parts for the P250. He seems very knowledgeable of them.

Todd, the P6 triggers look great. I just did the pay-pal thing for a steel one.
I sent my P6 out yesterday to CCR for refinishing and will forward this to Brad when I get it.
Still need grips. Cant decide between Nill's or the new Hogue aluminum jobbies.
Got the night sites from Clubster a while ago.
Made the deposit on a threaded Barsto with the group buy folks on Tuesday.
I figure I'll have enough to have bought an Elite in this thing when its done.
But WTF, I love this kind of stuff. It sooths my OCD tendencies.
I may not be able to fix whats broken in my life, but by God I can fix mechanical things. And thats almost enough.

Hey Todd-

Ready to hit the button on the 220 short trigger/nickel, but there's no link on your website.

quote:

Todd, the P6 triggers look great. I just did the pay-pal thing for a steel one.
I sent my P6 out yesterday to CCR for refinishing and will forward this to Brad when I get it.
Still need grips. Cant decide between Nill's or the new Hogue aluminum jobbies.
Got the night sites from Clubster a while ago.
Made the deposit on a threaded Barsto with the group buy folks on Tuesday.
I figure I'll have enough to have bought an Elite in this thing when its done. Eek
But WTF, I love this kind of stuff. It sooths my OCD tendencies.
I may not be able to fix whats broken in my life, but by God I can fix mechanical things. And thats almost enough.

I know what you mean. I seem to put way too much into some guns. But I ve also been able to rescue a number of guns that were pretty scary looking. I ll have a trigger heading your way

Thanks
Todd

quote:

Originally posted by dirtdawg2:
Hey Todd-

Ready to hit the button on the 220 short trigger/nickel, but there's no link on your website.

Just when you think you have everything covered LOL.

If you want just use the menu area for the P6/225 parts area and hit the button for the P6 Short trigger button, Just make a note that its for the 220 on the notes section.

I ll get the 220 setup soon on the site for ease of ordering.

Thanks
Todd

quote:

Originally posted by customizedcreationz:

quote:

Originally posted by dirtdawg2:
Hey Todd-

Ready to hit the button on the 220 short trigger/nickel, but there's no link on your website.

Just when you think you have everything covered LOL.

If you want just use the menu area for the P6/225 parts area and hit the button for the P6 Short trigger button, Just make a note that its for the 220 on the notes section.

I ll get the 220 setup soon on the site for ease of ordering.

Thanks
Todd

Todd-

Hit the button-NO notes section on paypal site.

Will send email with correction...

I ll be making more steel versions. I am surprised how many people ordered so quickly.

Plenty of Billet 6061 Aluminum triggers. The question has been asked several times about the aluminums strength. There really isnt a huge amount of stress on the trigger itself. The main point of pivot stress is the trigger bar pin itself. If the stress level was extremely high then the factory would have made the pin bigger. This is my speculation on it from my testing, so I am open to those who have stress tested this or have more knowledge then me on this particular area we are talking about. Now I ll be honest and say I havent tested my trigger for a year yet, but 500 rounds in a couple hours seems to be a good start. I ll continue to test my trigger and report results on it. For those of you on the fence about the aluminum versions,
I ll warranty the aluminum triggers with replacement steel version if there is a wear problem.

Dirtdawg,
Got your email !!


Thanks everyone
Todd

The last of the steel versions for now is sold. More being done as we speak.

Everything looks to be shipped Monday if it didnt go out today.

Thanks everyone for the overwhelming response.

More pictures coming !!

Thanks
Todd

More triggers shipped out today !!!

New pictures later ....

To see the change look at the trigger pivot pin and where your finger rests on the trigger compared to the stock location. These triggers are heads and tails above a stock trigger for feel. The trigger has more surface for a better "bite" with your finger.


I also wanted to mention that the blue/black is black oxide similiar to the color of the stock frame. My wife soon be, was doing invoices for these for me and put 1 blue and 1 black for some people. I just wanted to let people know that it is the blue/black ( but really black ) , not a blue and a black color offering. So those who ordered a blue and black, if you want you can email and change your order or I will continue with the black you see here. I am sorry if may have made that a little difficult to understand. So many people say blueing and its black and if you say black then your talking about something totally different it seems. So again this is a black oxide that is similar in color to the stock frame black.