March 19, 2019, 09:43 AM
jhe888High-grade steel for chef's knife?
quote:
Originally posted by batpot:
quote:
Originally posted by djpaintles:
There is NO such thing as a knife EDGE that is "dishwasher Safe".
You can wash your knives in the dishwasher or you can have knives that stay sharp you CAN'T have both!
I won't argue, but with virtually all knives under the $100 mark, the edge won't stay sharp anyway. That problem is solved by something this:
https://www.amazon.com/dp/B073SCBGWC/And they also don't chip.
Pull through sharpeners are harder on knives than dishwashers. At least that one isn't powered.
March 20, 2019, 04:49 AM
syboPerception, what are you using to sharpen CPMS35VN with? Sometimes iLIKE a “toothy” edge for certain tasks. But I am wondering if you might need to” smooth” out or purposely dull your blade and start sharpening with a higher grit and polish. A lot of guys take pride in reading the newspaper on a highly polished knife edge. I prefer to read the newspaper in the old fashion way, and use a knife to cut with.
March 21, 2019, 09:32 AM
Perceptionquote:
Originally posted by sybo:
Perception, what are you using to sharpen CPMS35VN with? Sometimes iLIKE a “toothy” edge for certain tasks. But I am wondering if you might need to” smooth” out or purposely dull your blade and start sharpening with a higher grit and polish. A lot of guys take pride in reading the newspaper on a highly polished knife edge. I prefer to read the newspaper in the old fashion way, and use a knife to cut with.
Typically I just sharpen with a sharpmaker. If I need to do any re profiling I wrap the stones with a more aggressive sandpaper.
There are times I like a toothier edge as well, I just found I had a hard time getting to a smooth one on my admittedly small sample of CPMS35V.
March 27, 2019, 08:51 AM
downtownvI have the Cold Steel #59KSSET
https://www.coldsteel.com/kitc...ssics-knife-set.htmlI sell them for $150 delivered ($269.99 list)
Sharp as hell allows the Blade to do all the work Great handles lifetime warranty.
You can spend a lot more but not get much better edges.
German 4116 Stainless Cryo Quenched, with Oak Wood Block included!