SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Please delete
Go
New
Find
Notify
Tools
Reply
  
Please delete Login/Join 
Member
posted
Please delete

This message has been edited. Last edited by: bigeinkcmo,
 
Posts: 5691 | Registered: October 11, 2005Reply With QuoteReport This Post
Only the strong survive
Picture of 41
posted Hide Post
quote:
5SME39HL 0252


A new motor and controller on ebay is $500 while used ones are about half the price.

A picture of the motor location would be helpful to determine the ease of changing the unit.


41
 
Posts: 11828 | Location: Herndon, VA | Registered: June 11, 2009Reply With QuoteReport This Post
Member
Picture of shiftyvtec
posted Hide Post
I replaced my variable speed blower motor about 3 years ago with an Evergreen unit which had an integrated module. If I recall, I could have bought the module separately but for just slightly more money, I got a new motor as well. It was roughly $300 through eBay.
 
Posts: 1568 | Location: Near Austin, TX | Registered: December 12, 2008Reply With QuoteReport This Post
Member
Picture of 08 Cayenne
posted Hide Post
My last furnace was a Lennox with VS, $800 for the DC module and $1000 for the motor. It failed at least a half dozen times, with a 10 yr warranty they took care of it. The first time it happened after the warranty expired I replaced it. A Lennox engineer actually came to my house to determine the problem, they said it was due to the ductwork modifications that the dealer did to install it. I refuse to have a VS now.
 
Posts: 1579 | Location: Ohio | Registered: May 27, 2008Reply With QuoteReport This Post
Only the strong survive
Picture of 41
posted Hide Post
Here is a rebuilt one for $320 verses a new one for $500.

https://www.ebay.com/itm/GE-Ge...Standard!20171!US!-1

https://www.ebay.com/itm/New-T...1:g:SzgAAOSwruxbDqXb

I would check with either one of these sellers to make sure your spec for motor and module will work with their offering. Sometimes the motor shaft length can be different.


41
 
Posts: 11828 | Location: Herndon, VA | Registered: June 11, 2009Reply With QuoteReport This Post
Bookers Bourbon
and a good cigar
Picture of Johnny 3eagles
posted Hide Post
Can you have the motor rebuilt locally? I've had it done with pool pump motors. Maybe a cheaper option.



BIDEN SUCKS.

If you're goin' through hell, keep on going.
Don't slow down. If you're scared don't show it.
You might get out before the devil even knows you're there.


NRA ENDOWMENT LIFE MEMBER
 
Posts: 7120 | Location: Arkansas  | Registered: November 06, 2010Reply With QuoteReport This Post
Member
posted Hide Post
Furnace model number?
Air conditioner model number?




 
Posts: 10045 | Registered: October 15, 2008Reply With QuoteReport This Post
Member
posted Hide Post
I replace mine with an Evergreen unit from Amazon. I just looked up. I paid $265 with 2 day free shipping for my model. You will also need a puller to pull the turbine off the old blower.
 
Posts: 1039 | Location: Fort Worth, Texas | Registered: August 11, 2010Reply With QuoteReport This Post
Member
posted Hide Post
For your particular situation, I'd probably stick with OEM parts.
Motor 469.12
https://www.repairclinic.com/P...179376?model=1150692
Control 390.00
https://www.amazon.com/MOD0218...rranty/dp/B00SA6ENN6


QwikSwap V3 is an option. 229.95
https://www.supplyhouse.com/Ge...HP-1070-RPM-115-230V
Along with a 1/2 HP, PSC motor. 86.95
https://www.supplyhouse.com/Ce...-RPM-Reversible-115V


Otherwise with some modifications (see notes), you could install an Evergreen 6005, 1/2 HP. 239.95
https://www.supplyhouse.com/Ge...HP-1070-RPM-115-230V

Notes:
* Not recommended by manufacture.
** I don't recommend it for a DIYer.

No matter which option you choose, make sure to select the proper speed taps, to allow for proper airflow for the hi/lo heat and cooling operations.




 
Posts: 10045 | Registered: October 15, 2008Reply With QuoteReport This Post
Member
Picture of erj_pilot
posted Hide Post
Buddy of mine that was in the A/C biz told me that, since my system is no longer under warranty, I should replace any parts with Trane parts. Might cost a little more, but it's worth the extra cost over American Standard. Blower wasn't working one morning when I got up, but thankfully it was only the capacitor, so no major repair cost yet. Buddy said a new install would run $6k - $8k depending on how crazy you wanted to get.



"If you’re a leader, you lead the way. Not just on the easy ones; you take the tough ones too…” – MAJ Richard D. Winters (1918-2011), E Company, 2nd Battalion, 506th Parachute Infantry Regiment, 101st Airborne

"Woe to those who call evil good, and good evil... Therefore, as tongues of fire lick up straw and as dry grass sinks down in the flames, so their roots will decay and their flowers blow away like dust; for they have rejected the law of the Lord Almighty and spurned the word of the Holy One of Israel." - Isaiah 5:20,24
 
Posts: 11054 | Location: NW Houston | Registered: April 04, 2012Reply With QuoteReport This Post
Member
posted Hide Post
Very common for part numbers to get superseded.
AmStd/Trane is the same company. Like Chevy/GMC.

You can see (in the link below) the MOD2186 supersedes your part number D341314P04 and fits your furnace model AUD080R9V3K4.
https://www.amazon.com/MOD0218...rranty/dp/B06Y1VK6SD

You can see (in the links below) that both of these parts fit your furnace model AUD080R9V3K4.
Motor https://www.repairclinic.com/P...179376?model=1150692
Control https://www.repairclinic.com/P...315022?model=1150692

Since your going OEM, your speed settings will be the same. So as long as they was set correctly when installed, they should be correct. But you know how things go, when you assume the previous tech did things correctly. Wink

It is recommended to change both the motor and control.




 
Posts: 10045 | Registered: October 15, 2008Reply With QuoteReport This Post
Member
posted Hide Post
It's the complete package.
As I stated earlier, the manufacture does not recommend it and I don't recommend it for a DIYer.

The control being out of stock is why I listed the link from amazon.




 
Posts: 10045 | Registered: October 15, 2008Reply With QuoteReport This Post
Member
posted Hide Post
Thanks for the update. It's not very often that we get 'the rest of the story'. Wink
Glad to hear everything is up and running.




 
Posts: 10045 | Registered: October 15, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Please delete

© SIGforum 2024