SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Glock incident: beware of this issue
Page 1 2 3 
Go
New
Find
Notify
Tools
Reply
  
Glock incident: beware of this issue Login/Join 
Member
posted Hide Post
Your reactions are all the same as mine. What?!

I would imagine the collective knowledge here is about 1,000 collective years of Glock usage experience, and it seems like a one in a billion chance.

When I read the article, I immediately knew where I was going to post it to see the reaction to this "defense." Smile

Fortunately, I do not represent this agency, or I would have been on the horn to the Chief asking for the real story.
 
Posts: 514 | Registered: November 13, 2009Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by Birdvol:
For gawds-sakes the man is hideously embarrassed with his screw up.

Pretend you believe him...just to be kind.

Then snicker behind his back.


Yup, that's about the size of it.
Effed up and looking for a booger-bear to blame it on.
Hell, we all do it.
Cuz it's embarrassing as hell.
 
Posts: 403 | Registered: November 30, 2009Reply With QuoteReport This Post
posting without pants
Picture of KevinCW
posted Hide Post
I wont' go so far as to say it isn't 100 percent impossible... but my "skeptical meter" is pegging at a really high level....





Strive to live your life so when you wake up in the morning and your feet hit the floor, the devil says "Oh crap, he's up."
 
Posts: 33287 | Location: St. Louis MO | Registered: February 15, 2004Reply With QuoteReport This Post
Member
posted Hide Post
Almost as good ad the magic AR15

http://www.thetruthaboutguns.c...o-remains-a-mystery/

quote:
Reason for Bainbridge Island, WA Officer’s Rifle Firing in Casino Remains a Mystery
BY DAN ZIMMERMAN |MAY 17, 2018 |50 COMMENTS
FACEBOOK
TWITTER
LINKEDIN
EMAIL

courtesy bainbridgereview.com

Here’s a typical lede to a type of story we’ve read dozens of times before: “Investigators are trying to determine why a Bainbridge Island police officer’s rifle inadvertently fired last month inside the Clearwater Casino while he was hurrying to an emergency backup call.”

Well, we have a pretty good idea why “the rifle fired.”

(Chief Matt) Hamner described the rifle as an AR-style semi-automatic rifle. The Washington State Patrol Crime Lab inspected the gun and could find no evidence of something wrong with it, Hamner said. Now it is being analyzed by the Kitsap County Sheriff’s Office, which is conducting the investigation. Hamner said he wanted an outside agency to review the incident.

Oh, definitely. In fact, Hamner (above, left) should also send it to the FBI lab in D.C. when the locals are finished with it. Surely they’ll be able to figure out how this crazy AR just decided to fire itself as the un-named officer was carrying it. In a hurry. On an emergency backup call.

“I want to get to the bottom of this and regardless of the findings the weapon will not be used again,” Hamner said, adding that in light of the inadvertent discharge the department planned a review of policies and procedures. “This is very disconcerting to me.”

That seems prudent given the circumstances. Any firearm with a mind of its own simply can’t be trusted in a duty situation. The Bainbridge Island PD really should melt this one down to ensure that it never does anything like that again.

It may seem strange the Kitsap Sun’s Andrew Binion doesn’t even mention the possibility that the officer — in a high stress, adrenaline-fueled situation — might have had his finger on trigger as he was hurrying to help a fellow officer. You’re probably thinking that, rather than a malfunctioning rifle, this was a “simple” case of a negligent discharge.

But cut the reporter a break. He was no doubt assure by Chief Hamner that the un-named officer’s finger was indexed and nowhere near the trigger when the rifle put a round into the Casino floor. And like most reporters, he doesn’t know enough about firearms to realize when someone is peeing on his leg and telling him it’s raining.

The officer was not placed on administrative leave, Hamner said, because no misconduct was alleged.

“I want to know what the cause is so we can make sure it never happens again,” he said.

As do we all.
 
Posts: 6633 | Location: Virginia | Registered: December 23, 2010Reply With QuoteReport This Post
For real?
Picture of Chowser
posted Hide Post
Jeez. Not this again.

Cop screwed up, plain and simple.

We've had some NDs during qualifications and it's always the officer's booger hook. Handgun and rifle.



Not minority enough!
 
Posts: 8013 | Location: Cleveland, OH | Registered: August 09, 2007Reply With QuoteReport This Post
"Member"
Picture of cas
posted Hide Post
Well just in our small sampling of people who posted in this thread, we have two people who've seen the pins come out. I suppose you'd need a combination of that, a tight fitting kydex holster, a light trigger, bad luck and maybe pushing to hard or fast? Anything is possible I guess. I've seen guns to things that don't make sense. Big Grin


_____________________________________________________
Sliced bread, the greatest thing since the 1911.

 
Posts: 21101 | Location: 18th & Fairfax  | Registered: May 17, 2003Reply With QuoteReport This Post
Member
posted Hide Post
I spent some time this afternoon experimenting with the triggers on several Glocks. In each case, the position of the trigger safety pin had to be past the frame before the striker tripped; if the pin were extended far enough to lose the trigger safety insert, it could be pushed aft until it contacted the frame, and would prevent the trigger from being pressed far enough to discharge the weapon. Additionally, if the pressure were on the extended pin, movement of the pin would be in excess of the trigger, now allowing the trigger to move far enough aft to discharge the weapon.

If someone has exchanged the trigger return spring for a lighter weight, or incorrectly installed the spring, it's possible for the trigger to not fully reset far enough to engage the trigger safety insert, allowing the trigger to be depressed without need of the trigger insert. The G40 I just picked up was that way; light spring and improperly installed, and the trigger didn't come far enough forward to engage the trigger safety.

It strains credibility, however, to suggest that the pin backed out far enough to catch on the holster, and then was depressed far enough to discharge the weapon, when the pin backed out actually prevents the trigger from being depressed enough to do that.
 
Posts: 6650 | Registered: September 13, 2006Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Glock incident: beware of this issue

© SIGforum 2024