I managed to break a couple of half inch drive sockets trying to get a really stuck hub nut off last weekend. I fixed that problem with a 1" drive breaker bar shipped Prime (yeah, F-you, hub nut).
One socket wrench was Lowes/Kobalt, the other Sears/Craftsman. Wife took the Kobalt to the local Lowes. They said, "impressive". She walks out with a new one.
Fast forward to this weekend when I have a chance to get over to Sears. Throw down the broken wrench expecting them to tell me to go pick up a new one off the shelf (which is what I did last time I broke a half inch drive, years ago). Instead, the counter kid rummages around under the counter, pulls out an obviously old wrench that has apparently been rebuilt and says that's my exchange. Apparently they aren't allowed to replace broken tools with new ones anymore. Well...crap.
I assume this is more fallout from the swirl of Sears' slow but inevitable trip down the toilet.
That's it. I'm done with you Sears.
...that I will support
I had heard that, so when I broke my craftsman socket drive, I just figured on seeing if I could buy the parts to fix it myself.
NRA Life Endowment member
Tri-State Gun collectors Life Member
One has to remember that Sears no longer owns Craftsman, they sold it. The new owner may not be be living up to the old Craftsman warranty. Along with many of the Craftsman mechanical tools have been made in China not the USA as before. Chris
I think you'll spend more time/effort trying to find the replacement parts than its worth. I'd roll the dice and maybe you'll get a refurb that's nicer than the one I got...with someone's intials in sharpie and paint splotches on on it.
...that I will support
|Only the strong survive|
They probably have someone come in and rebuild the old ones turned in.
"Donald Trump is the grizzly bear in The Revenant. If you get his attention, he’ll be awake, bite your face off, and sit on you.".. Newt Gingrich.
|Once a Marine, |
always a Marine
I was a district manager with Sears for 4 years. The staff does the rebuilds during slow times. It really does not take that long.
Greedy bastards can be thanked for the change of how exchanges are done now. Guys I lost track of the number of times people would come in with BAGS of ratchets, wanting new exchanges. They would pick them up at garage sales, and then sell the exchanged ones on EBay. This used to happen A LOT.
That is the primary reason you cannot walk into most sites and exchange for a brand new one anymore.
All it takes...is all you got.
For those who have fought for it, Freedom has a flavor the protected will never know
Doesn't surprise me a lot of people are pieces of shit nowadays.
|On the DL|
They are entrepreneurs.
A mind is a terrible thing.
I recently exchanged a broken Craftsman wrench for a new one off the shelf .
|His diet consists of black|
coffee, and sarcasm.
Or a cause of it. Kind of a "chicken or egg first" question, isn't it?
Sticks and stones may break my bones, but hollowpoints expand on impact.
|Chilihead and Barbeque Aficionado|
Those were the same people who would hang out at Wal-Mart early in the morning and buy up every single box of .22LR that would come in, leaving none for other customers. The bastages!
I hope none of my older Craftsman tools break. I'm trying hard not to abuse them.
2nd Amendment Defender - NRA member
The Second Amendment is not about hunting or sport shooting.
I had a 3/8 drive ratchet go south yesterday and I stopped by Sears. The girly at the register told me to go grab a new one and I was out in 5 minutes.
I think sometimes it is the individual not the store...I also had to go to Apple store and replace a fraying cable (apple cables suck) and the first "genius" (using term loosely) was a complete cock-knocker and told me the cable was my fault then flat out refused to replace it. I asked for the "head genius" and explained what happened, had new cable in mayor of minutes and was out the door with a handshake and apology.
|Too old to run, |
too mean to quit!
Unfortunately, now days we are subject to lots of focus on corporate profits, at any cost (no pun intended).
Reduce quality of product, slightly, then do it again, use cheaper materials, etc etc etc.
All while senior executives of those corporations are taking home millions in bonuses for doing such a good job of increasing profits.
Pure greed, stupidity. Why should they worry about what happens to the company a year, or 3, down the road? They will have scammed a ton and be gone.
I saw it happen in IBM. Since its inception the company had focused on customer satisfaction, great products, great service. Every CEO up to the point that they put Akers in office was from sales, and knew who the customer was. Also knew that without happy customers your business would die.
Board put Akers on bonus based on "profits" which led to drastic reductions in customer service, R&D. Akers was in office the first year that IBM actually lost money, but he pocketed something like 2 1/2 megabucks!
Too many companies today are so focused on short term stuff that they do really dumb stuff that while making the short term look good, do major damage in the long term. So, end of rant.
There has never been an occasion where a people gave up their weapons in the interest of peace that didn't end in their massacre. (Louis L'Amour)
"To compel a man to furnish contributions of money for the propagation of opinions which he disbelieves and abhors, is sinful and tyrannical. "
"America is great because she is good. If America ceases to be good, America will cease to be great." Alexis de Tocqueville
The Idaho Elk Hunter
The other explanation for bringing in a bag of broken tools is the lousy service you get when you try. Just not worth it to make a special trip to Sears so you can replace something. I have a pile (literally) of Craftsman tools out in the garage. Broken ones. I won't bag them up to take to the mall until I absolutely have to go with my wife. She can shop, I can waste time arguing with the moron. Yes, is says Craftsman on the thing. Its supposed to be guaranteed, so I want a new one. I'd take an older American made one if its OK. If Sears doesn't like it, too bad.
I also think its based on the store (or as said above, the person).
There was a time when the home mechanic could argue his Craftsman tools were nearly as good as Mac or SnapOn. I never fell for it because if you broke a tool when using it, you're out of luck. No one ever breaks one while not using it.
If you have sons, you tell them to use the Craftsman brand. Keep their cotton pickin hands off my SnapOn tools. Easy way to have all your tools where you expect them.
Unhappy ammo seeker
While I don't dispute that there are people who abuse the system (like the hippies who would totally rip off REI with their lifetime warranty after using gear for a season, such that REI only warranties for a year now), I wonder at how many people like me they have lost.
For the number of times that I can count on one hand that I've had to trade in a tool, I've bought a buttload of Craftsman tools on the knowledge that if I needed to, I could. No longer.
...that I will support
I've seen a lot of this in the world I work in as well, where "strategic" is 18-24 months. They screw over their employees, their customer, etc to make the company numbers look good enough so that they can sell off the mess to someone else.
...that I will support
I'm willing to bet you broke both ratchets with a 2' pipe stuck on the end of them for extra leverage. The lifetime warranty is for life when used in the manner it was designed for (not as a breaker bar with a pipe stuck on the end of it). That being said, if the rebuilt ratchet functions like a new one, what's the difference? If a $500,000 diesel engine blows up on a customers yacht Cat or MTU rebuild that engine in place and also not responsible for his loss of use of the yacht for 30-60 days while they rebuild the motor.
If they want to exclude things, they should state it up front. Not allow the register clerk make the decision. I'd bet most have never even worked in a garage or used the tools they get to decide upon.
And I have adapters, the ones that let you use a 1/2" socket on a 3/4 drive bar. They say craftsman, so it should be warranted. If they say SnapOn, they sure are warranted.
Unhappy ammo seeker
|Dances With |
I simply like tools, don't use them for a living, and I buy on fleabay a lot. I'm a tool junkie and I enjoy older American made products that still work and work well.
I've bought several vintage Craftsman ratchet in the last few weeks.
How much do you want to bet that my broken Craftsman ratchet was used with a pipe on it? Or in any way other than intended? Bet as much as you'd like because you will lose whatever it is.
About 10 years ago I bought one of the more expensive sets from Craftsman that has both the 3/8 and 1/4 wrenches and all the sockets to match including deepwells and extensions. It also came with some open end wrenches and a screwdriver, bits and adapters. IIRC it cost around 300 bucks. The 1/4 socket wrench has barely been used as I almost only use the 3/8 but I pulled it out the other day and it was broken.
Meanwhile the Husky socket wrenches I use for work, which have been used a ton and with pipes and as hammers and in all sorts of hard ways not really intended, are rock solid. I used my Husky from my work toolbox to finish the job tat the Craftsman couldn't.
I figure between the fact that Craftsman was sold off and that Sears is pretty much guaranteed to fold within the next few years I will try to get a replacement for my broken ratchet and simply forget about buying anything from either brand.
|Powered by Social Strata||Page 1 2|