May 31, 2017, 03:36 PM
taguinp226 barrel mod
Hello,
I am looking to have a stock factory P226 9X19 chambered barrel reamed to chamber 9X21. Any recommendations as to who can handle this type of modification? I already tried GGI and they are not accepting custom work at this time. Thanks in advance!
June 02, 2017, 09:01 AM
taguinI was given a bunch of 9X21 ammo and I have a spare barrel. I live out west behind enemy lines, easier to have a multi-caliber platform than buying and waiting 10 days to pick it up.
June 02, 2017, 09:44 AM
flesheatingvirusWould the same magazines work?
June 02, 2017, 02:15 PM
taguinApex, Cylinder and Slide, Arizona Response Systems, said they don't do this kind of work.
Grays Guns is too busy to accept custom work till early next year.
I'm waiting to hear back from Briley and Robar.
June 02, 2017, 08:47 PM
m.tenenhausperhaps call manson reamers...might be something you can do yourself.
June 11, 2017, 11:47 PM
taguinYes, said he doesn't do that type of work. I found a local smith who said it was possible.
June 13, 2017, 11:19 AM
az4783054Try this shop. Phillip does a lot of off the wall barrel conversions (.32naa in RUGER LCP).
https://www.innovativearms.com/June 27, 2017, 06:22 PM
taguin*Update*
Sent barrel out and is getting modified,should have more to post once I get it back! Thanks!
July 10, 2017, 09:14 AM
GraygunsPlease send me an email to bruce@grayguns.com. Thank you. -Bruce
Designer and custom pistolsmith at Grayguns Inc. Privileged to be R&D consultant to the world's greatest maker of fine firearms: SIG SAUER
Visit us at
http://opspectraining.com/product-cat/videos/ to order yours, and Thank You for making GGI the leader in custom SIG and HK pistolsmithing and high-grade components.
Bruce Gray, President
Grayguns Inc.
Grayguns.com / 888.585.4729
July 14, 2017, 09:00 PM
taguinBruce, eMail sent. Thank you!
July 14, 2017, 10:03 PM
PGTI'm interested to know if this is possible. I've got a Beretta 98G Elite II slide marked for 9x21 and would make a great addition.
July 15, 2017, 12:19 PM
taguinIt's done! Local 'smith was able to open up the chamber using a standard 9X19 reamer to allow for the 2mm of difference between the cartridges/rounds. I was able to source a used DE marked P226 9X19 barrel for the. Project. It's just the beginning as I plan to have another made sometime down the road from a new barrel. The ammo. I'm using is Fiocchi 123gr 9X21. It is a little snappier but not much as compared to standard 9X19 ammo. There's more ammo specific testing I'd like to perform. Thanks to everyone!