May 12, 2017, 12:53 PM
walker2713School Me on P320 Sight Sizes?
I've got a P320C coming my way, and want to put night sights on it....most likely the Ameriglo Hackathorns. What's the difference between the #6 and the #8 sights? Is it important? Many thanks.
George
May 12, 2017, 01:16 PM
GP229The number represents the height of the sight, so yes, it is important.
May 12, 2017, 01:25 PM
JAFOThe rule of thumb is #8 front/#8 rear for 9mm and .357Sig, and #6 front/#8 rear for .40 and .45. As it is a generalization, it is always possible that night sights may not hit exactly where you want them to, even if you get the "right" set. But your choices are limited by the available sizes offered.
May 12, 2017, 01:41 PM
az4783054Just be aware that for some reason SIG has been shipping 9mm P320c and p320sc pistols (maybe others as well) with #6/#8 night sights installed. Some have reported theirs came with #8/#8 so they're not consistent.
My three 9mm shoot just fine with the #6/#8 combination but I shoot only to 15 yds. But it's contrary to their previous production of other platforms.
May 12, 2017, 02:40 PM
walker2713Thanks for the responses....very helpful.
May 30, 2017, 01:03 PM
Bofireso can I assume that a #6 front sight is shorter then a #8? or taller?
thanks
May 30, 2017, 04:05 PM
GP229A #6 is taller than a #8 by .010"
May 30, 2017, 05:04 PM
stoic-onequote:
Originally posted by Bofire:
so can I assume that a #6 front sight is shorter then a #8? or taller?
thanks
Taller.
The way SIG does their numbering is a tad different.
Numbers up, impact up.As I understand it, each increment of change on the front site changes the POI by 1" @ 25 meters. So the difference between a #6F and a #8F, the #8F will hit higher by 2" at 25 meters.
Higher number front sights are actually shorter.
Numbers up, impact up.For the rear, each increment results in a change of 2" POI at 25 meters. Besides for suppressor sights, there aren't many vendors that offer rear night sights that aren't #8 rears.
Higher number rear sights are actually taller.
Rear Sight Heights:
#4 = 5.24mm (0.21 inches)
#5 = 5.52mm (0.22 inches)
#6 = 5.80mm (0.23 inches)
#7 = 6.07mm (0.24 inches)
#8 = 6.35mm (0.25 inches)
#9 = 6.62mm (0.26 inches)
#10 = 6.90mm (0.27 inches)
Front Sight Heights:
#5 = 6.01mm (0.235 inches)
#6 = 5.88mm (0.230 inches)
#7 = 5.74mm (0.225 inches)
#8 = 5.60mm (0.220 inches)
#9 = 5.46mm (0.215 inches)
#10 = 5.32mm (0.210 inches)
I'm sure that's clear as mud.
May 30, 2017, 05:22 PM
RichNBefore you order new sights, I would shoot the gun with the factory sights and note what numbers they are and where they hit.
If they shoot to point of aim, order the same numbers.
If they do not shoot to point of aim, adjust accordingly when you order the new sights.
May 30, 2017, 09:41 PM
BofireThanks you have all been very helpful
Carl