SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    Taken to task today!

Moderators: Chris Orndorff
Go
New
Find
Notify
Tools
Reply
  
Taken to task today! Login/Join 
Member
posted
So, I found a BNIB Sig P226 in 40/357 Sig for a decent price because it is a California model (and I'm sure no one wanted it); loaded chamber indicator, magazine disconnect and 10 round magazines. I wanted to at least remove the magazine disconnect, and all went well until I attempted to put the locking block back in place. I finally got it back together, but my thumbs are sore, my arms are worn out and my head wants to explode! It looked so easy on Youtube, but in real life it was extremely challenging. Maybe there is a "trick" to getting it all back together???
 
Posts: 697 | Location: Virginia | Registered: August 03, 2012Reply With QuoteReport This Post
Member
Picture of markstempski
posted Hide Post
There is always a trick. Seems to be a law of nature that the one view you need on the video is not there. I have a friend that takes all of his sigs apart and breathes on them just a little. He says there is always a trick to each sub assembly. He steers away from the firing pin and its position pins on the folded slides saying too easy to screw that up with the punches. He has more trouble than I do with the locking block but less trouble with the trigger pivot pin. All a matter of repetition though still frustrating at times. I have a set of hemostats that made made life easier and always have the right punches and armorers block.


Mundus Vult Decipi
 
Posts: 1048 | Location: Duvall WA, USA | Registered: February 08, 2004Reply With QuoteReport This Post
Moderator
posted Hide Post
quote:
Maybe there is a "trick" to getting it all back together???


Make sure the trigger pivot pin is oriented correctly (slots down). Make sure the pistol is decocked. Make sure the slide catch lever is hard against the inside of the frame. Use your trigger finger behind the trigger to push forward on the trigger (keeps everything in place). Set the locking insert on top of the trigger and allow the insert the follow the contour of the trigger as it literally drops into place Cool

Not bragging, but I've never had an issue replacing the insert, while I've watched "certified" armorers struggle mightily.

Repetition helps Wink


__________________


"Owning a handgun doesn't make you armed any more than owning a guitar makes you a musician." -Jeff Cooper


Now an FFL licensee, working on SIGs and other assorted firearms. My email is in my profile.
 
Posts: 8411 | Location: UT | Registered: December 05, 1999Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    Taken to task today!

© SIGforum 2019