SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    Local Gunsmith
Go
New
Find
Notify
Tools
Reply
  
Local Gunsmith Login/Join 
Member
posted
I usually do my own work. On my sig P226 Leigon rx. I have polished the hammer and sear, reduced the spring, but would still like less trigger pull.
I know I can hone the sear, but they wear out in less than a year.

I need someone to treat (harden) the surfaces when done.
I am in Queens NY, Don't really know anyone that will do the hardening.
Any recommendations please.
 
Posts: 11 | Registered: October 27, 2016Reply With QuoteReport This Post
"Member"
Picture of cas
posted Hide Post
You could try yourself...


I've used it a few times in the past, but usually don't as I generally am not removing enough metal to need to, or working on things with shallow enough hardening.


_____________________________________________________
Sliced bread, the greatest thing since the 1911.

 
Posts: 21053 | Location: 18th & Fairfax  | Registered: May 17, 2003Reply With QuoteReport This Post
avoiding birthday parties
Picture of fjgiie
posted Hide Post
These parts will save you a pile of money. They are already polished and ready to drop in. You may need to fit the safety lever top part.

https://cylinder-slide.com/Category/SigPSeries
 
Posts: 1366 | Registered: March 05, 2010Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    Local Gunsmith

© SIGforum 2024