SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    Think I destroyed my P6 slide
Page 1 2 

Moderators: Chris Orndorff

Closed Topic Closed
Go
New
Find
Notify
Tools
Think I destroyed my P6 slide Login/Join 
Member
posted Hide Post
quote:
Originally posted by fav567:
All GOOD!!! used the disc brake compression tool from ebay and was able to open up the slide.



Thanks for the tip. I like the looks of that brake tool.
 
Posts: 120 | Registered: January 13, 2011Report This Post
Member
posted Hide Post
I just purchased an MGW sightpro universal pusher.

You buy different slide shoes for different model guns and it will prevent the slide from being compressed.


______________________________________________________________________________
You can only go so far any direction before you eventually drive off a cliff
 
Posts: 5804 | Registered: January 17, 2011Report This Post
Tiny dick faggot
posted Hide Post
I had Trijicon HDs put on an HK P30L slide recently, and the gunsmith had to homebrew some shims/gap fillers (edit: shoes) to reinforce the slide front and rear where pressure, apparently a lot, was being placed by the sight pusher. Never realized this was a concern. Glad you were able to fix your slide.
 
Posts: 2927 | Registered: July 21, 2005Report This Post
  Powered by Social Strata Page 1 2  

Closed Topic Closed

SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    Think I destroyed my P6 slide

© SIGforum 2017