SIGforum
P239 SRT Parts question

This topic can be found at:
http://sigforum.com/eve/forums/a/tpc/f/150601935/m/3230029574

October 25, 2020, 02:51 PM
PPS1980
P239 SRT Parts question
The SRT kit for the P239 is either long gone of really dearly priced these days. In looking at the parts included it looks to me like the SRT Sear (1200457R) and the SRT Safety Lever (Lever-9) are the only parts in the kit, is that correct?


I prefer dangerous freedom over peaceful slavery.
- Thomas Jefferson 1787
October 29, 2020, 12:12 AM
DansSIGs
And the trigger bar return spring.

The trigger bar return spring aft end that catches in the trigger bar notch has to be shortened approximately .040" so it does not interfere with the long fingered SRT firing pin safety lever.

DA/SA SRT sear & safety bars are the same.


Favor Center,Mass.
October 31, 2020, 10:19 PM
texassierra
I just installed two P239 SRTs today. I used P226, P229, etc. kits and I ordered what I thought were the appropriate return springs but they ended up being the same as the original. I just used a pair of small snips and took off a little. Worked like a charm.


NRA Life Patron