August 04, 2017, 06:44 PM
jimbo883Trigger pull on a P225
I'm wondering if I change the hammer spring to a lighter rated spring will that help lower the trigger pull on my P225.
Also can I swap out the old style hammer spring arrangement for the newer plastic parts? Working with that little pin seems daunting.
August 04, 2017, 08:48 PM
GaryBFInstalling a lighter mainspring will reduce the trigger pull weight somewhat, however, the reduction is not dramatic, in my experience. But every little bit helps. Be sure to test for light strikes before you go into battle.
August 04, 2017, 10:50 PM
jhe888Wolff Gunsprings offers hammer springs for the old style and the plastic based struts. As I recall, I put an 18 pound spring in mine, which has the old style base. It makes the trigger lighter and 100% reliable.
August 18, 2017, 06:31 AM
jimbo883Thanks guys, ordered new style E2 hammer spring setup with a 19 pound wolf spring. Will install this weekend and try it out.
August 18, 2017, 08:24 PM
JoeyBones7Timely thread for me, and I hope nobody minds the slight drift...
What's the best trick for reinstalling a mainspring on these guns? What's this "fishing line" trick that some guys mention?
Thanks in advance.