I don't have any doubts that I can successfully install the SRT parts myself (including a short trigger), but I want your opinion: is it worth the risk of voiding the warranty?
If you can disassemble the pistol frame, installation of the SRT parts is not difficult. It's simply a matter of switching the sear and safety lever. The short trigger is unrelated to the SRT, but swapping it is easily included the process.
If you're using all factory parts, perform the modifications in accordance with usual procedures, and don't damage anything, there's no way anyone can tell if the SRT parts and trigger were installed at the factory, by a certified armorer, or the owner of the gun.
“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.” — Leo Tolstoy
Posts: 20777 | Location: 10,150 Feet Above Sea Level In Colorado | Registered: April 04, 2002
Originally posted by swopejs: I don't have any doubts that I can successfully install the SRT parts myself (including a short trigger), but I want your opinion: is it worth the risk of voiding the warranty?
Where are you getting the parts? That is what most people have a problem with...
Posts: 151 | Location: Somewhere North of Boston | Registered: June 01, 2006
