SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    P226 Torx Grip Screws
Go
New
Find
Notify
Tools
Reply
  
P226 Torx Grip Screws Login/Join 
Member
Picture of bob ramberg
posted
Does anyone know where I can find TORX type grip screws for my P226? I lost one at a match. These are not the hex head/allen head type.

I have tried Top Gun Supply and Brownells. I also did a Google search of the internet with no luck.


Bob
Carpe Scrotum
 
Posts: 1362 | Location: Democratic Peoples Republic of Madiganistan | Registered: February 20, 2008Reply With QuoteReport This Post
Member
Picture of giz55792
posted Hide Post
Gregcote.com or maybe contact SIG directly.
 
Posts: 711 | Location: Virginia, MN | Registered: October 01, 2012Reply With QuoteReport This Post
That's just the
Flomax talking
Picture of GaryBF
posted Hide Post
Hogue sells hex head screws, but not Torx. I have only seen Torx used on the SIG P229.
 
Posts: 11875 | Location: St. Louis, Missouri | Registered: February 04, 2008Reply With QuoteReport This Post
Member
Picture of bob ramberg
posted Hide Post
my .40S&W P226 CPO came with them.

The Gregcote.com address does not work. Is it spelled correctly? Never mind, its gregcotellc.com, but he doesn't have it either.


Bob
Carpe Scrotum
 
Posts: 1362 | Location: Democratic Peoples Republic of Madiganistan | Registered: February 20, 2008Reply With QuoteReport This Post
Member
Picture of hi-power man
posted Hide Post
Do you have a good local hardware in your area, not a Home Depot or Lowes. I can't speak about ACE, I've never been inside one their stores. I found a local hardware that carries every type screw I've ever looked for, in small drawers not bubble packs. Be sure to take one of the type you are looking for.


* * * * * * *
High capacity is not an acceptable substitute for good marksmanship.
 
Posts: 867 | Location: Kentucky | Registered: December 07, 2006Reply With QuoteReport This Post
Member
posted Hide Post
For 8 bucks, I'd just get some Hogue hex head screws if you can't find Torx.

http://gregcotellc.com/cart/ho...87619baa8eb84302846b


______________________
An expert is one who knows more and more about less and less until he knows absolutely everything about nothing. --Nicholas Murray Butler
 
Posts: 4670 | Location: Pennsylvania | Registered: June 29, 2006Reply With QuoteReport This Post
Member
Picture of bob ramberg
posted Hide Post
[QUOTE]Originally posted by Nipper:
For 8 bucks, I'd just get some Hogue hex head screws if you can't find Torx.

That's my back-up plan but I thought I try to find the torx first.


Bob
Carpe Scrotum
 
Posts: 1362 | Location: Democratic Peoples Republic of Madiganistan | Registered: February 20, 2008Reply With QuoteReport This Post
Member
posted Hide Post
P229 Torx fit fine on the P226


__________________________________________________

If you can't dazzle them with brilliance, baffle them with bullshit!

Sigs Owned - A Bunch
 
Posts: 4250 | Location: Nashville, Tennessee | Registered: December 16, 2004Reply With QuoteReport This Post
Free radical
scavenger
Picture of rh
posted Hide Post
quote:
Originally posted by Anush:
P229 Torx fit fine on the P226


I just verified that with my P229's Torx grip screws and two P226s.
 
Posts: 1140 | Registered: April 02, 2007Reply With QuoteReport This Post
Member
Picture of bob ramberg
posted Hide Post
Anush and rh

Thanks for the info. I had given up hope.


Bob
Carpe Scrotum
 
Posts: 1362 | Location: Democratic Peoples Republic of Madiganistan | Registered: February 20, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Armorer    P226 Torx Grip Screws

© SIGforum 2024